#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
-#define CONFIG_SPL_MAX_SIZE (172 * 1024)
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
-
#ifdef CONFIG_SPL_BUILD
/*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_WATCHDOG
-#define CONFIG_SPL_DRIVERS_MISC
-#define CONFIG_SPL_POWER
-#define CONFIG_SPL_I2C
-#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
-#define CONFIG_SPL_STACK 0x187FF0
-#define CONFIG_SPL_LIBCOMMON_SUPPORT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO
-#define CONFIG_SPL_MMC
-#define CONFIG_SPL_BSS_START_ADDR 0x00180000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x2000 /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 /* 512 KB */
-#define CONFIG_SYS_SPL_PTE_RAM_BASE 0x41580000
/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
-#define CONFIG_MALLOC_F_ADDR 0x182000
+#define CFG_MALLOC_F_ADDR 0x182000
/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#undef CONFIG_DM_MMC
-
-#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#endif
-#define CONFIG_REMAKE_ELF
-
/* ENET Config */
/* ENET1 */
#if defined(CONFIG_CMD_NET)
-#define CONFIG_MII
-#define CONFIG_ETHPRIME "FEC"
-
-#define CONFIG_FEC_MXC
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_FEC_MXC_PHYADDR 0
-#define FEC_QUIRK_ENET_MAC
-
-#define CONFIG_PHY_GIGE
-#define IMX_FEC_BASE 0x30BE0000
-
-#define CONFIG_PHYLIB
+#define CFG_FEC_MXC_PHYADDR 0
#endif
-#define CONFIG_MFG_ENV_SETTINGS \
+#define CFG_MFG_ENV_SETTINGS \
"initrd_addr=0x43800000\0" \
"initrd_high=0xffffffff\0" \
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_MFG_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
+ CFG_MFG_ENV_SETTINGS \
"script=boot.scr\0" \
"image=Image\0" \
"console=ttymxc0,115200\0" \
"initrd_addr=0x43800000\0" \
"initrd_high=0xffffffffffffffff\0" \
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
- "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcpart=1\0" \
+ "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
"mmcautodetect=yes\0" \
"mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"booti; " \
"fi;\0"
-#define CONFIG_BOOTCOMMAND \
- "mmc dev ${mmcdev}; if mmc rescan; then " \
- "if run loadbootscript; then " \
- "run bootscript; " \
- "else " \
- "if run loadimage; then " \
- "run mmcboot; " \
- "else run netboot; " \
- "fi; " \
- "fi; " \
- "else booti ${loadaddr} - ${fdt_addr}; fi"
-
/* Link Definitions */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR 0x40000000
+#define CFG_SYS_INIT_RAM_SIZE 0x80000
-#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CFG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x40000000 /* 1GB DDR */
-#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
- (PHYS_SDRAM_SIZE >> 1))
-
-#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_IMX_BOOTAUX
-
-#define CONFIG_SYS_FSL_USDHC_NUM 2
-#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
-
-#define CONFIG_MXC_GPIO
+#define CFG_MXC_UART_BASE UART_BASE_ADDR(1)
-#define CONFIG_OF_SYSTEM_SETUP
+#define CFG_SYS_FSL_USDHC_NUM 2
+#define CFG_SYS_FSL_ESDHC_ADDR 0
#endif