Convert CONFIG_SPLASH_SCREEN et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / imx8mq_evk.h

diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index 7759bbf..d98f926 100644 (file)
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -7,17 +7,15 @@
 #define __IMX8M_EVK_H
 
 #include <linux/sizes.h>
+#include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#ifdef CONFIG_SECURE_BOOT
-#define CONFIG_CSF_SIZE                        0x2000 /* 8K region */
-#endif
+#define CONFIG_SYS_BOOTM_LEN           (32 * SZ_1M)
 
 #define CONFIG_SPL_MAX_SIZE            (124 * 1024)
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
@@ -36,8 +34,6 @@
 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE    0x80000  /* 512 KB */
 #define CONFIG_SYS_SPL_PTE_RAM_BASE    0x41580000
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
 
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
 #define CONFIG_MALLOC_F_ADDR           0x182000
@@ -63,22 +59,9 @@
 
 #define CONFIG_REMAKE_ELF
 
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-
-#undef CONFIG_CMD_EXPORTENV
-#undef CONFIG_CMD_IMPORTENV
-#undef CONFIG_CMD_IMLS
-
-#undef CONFIG_CMD_CRC32
-#undef CONFIG_BOOTM_NETBSD
-
 /* ENET Config */
 /* ENET1 */
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
 #define CONFIG_MII
 #define CONFIG_ETHPRIME                 "FEC"
 
@@ -89,9 +72,6 @@
 
 #define CONFIG_PHY_GIGE
 #define IMX_FEC_BASE                   0x30BE0000
-
-#define CONFIG_PHYLIB
-#define CONFIG_PHY_ATHEROS
 #endif
 
 #define CONFIG_MFG_ENV_SETTINGS \
@@ -110,11 +90,11 @@
        CONFIG_MFG_ENV_SETTINGS \
        "script=boot.scr\0" \
        "image=Image\0" \
-       "console=ttymxc0,115200 earlycon=ec_imx6q,0x30860000,115200\0" \
+       "console=ttymxc0,115200\0" \
        "fdt_addr=0x43000000\0"                 \
        "fdt_high=0xffffffffffffffff\0"         \
        "boot_fdt=try\0" \
-       "fdt_file=fsl-imx8mq-evk.dtb\0" \
+       "fdt_file=imx8mq-evk.dtb\0" \
        "initrd_addr=0x43800000\0"              \
        "initrd_high=0xffffffffffffffff\0" \
        "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
@@ -183,10 +163,6 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_OFFSET               (64 * SZ_64K)
-#define CONFIG_ENV_SIZE                        0x1000
-#define CONFIG_SYS_MMC_ENV_DEV         1   /* USDHC2 */
 #define CONFIG_MMCROOT                 "/dev/mmcblk1p2"  /* USDHC2 */
 
 /* Size of malloc() pool */
@@ -196,13 +172,6 @@
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE                        0xC0000000 /* 3GB DDR */
 
-#define CONFIG_SYS_MEMTEST_START       PHYS_SDRAM
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_MEMTEST_START + \
-                                       (PHYS_SDRAM_SIZE >> 1))
-
-#define CONFIG_BAUDRATE                        115200
-
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE           UART1_BASE_ADDR
 
 /* Monitor Command Prompt */
@@ -217,10 +186,6 @@
 
 #define CONFIG_IMX_BOOTAUX
 
-#define CONFIG_CMD_MMC
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
-
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 
@@ -228,8 +193,6 @@
 
 #define CONFIG_MXC_GPIO
 
-#define CONFIG_CMD_FUSE
-
 /* I2C Configs */
 #define CONFIG_SYS_I2C_SPEED             100000