power: Rename CONFIG_POWER to CONFIG_POWER_LEGACY

[platform/kernel/u-boot.git] / include / configs / imx8mq_evk.h

diff --git a/include/configs/imx8mq_evk.h b/include/configs/imx8mq_evk.h
index 1861eba..d694379 100644 (file)
--- a/include/configs/imx8mq_evk.h
+++ b/include/configs/imx8mq_evk.h
@@ -19,16 +19,16 @@
 
 #ifdef CONFIG_SPL_BUILD
 /*#define CONFIG_ENABLE_DDR_TRAINING_DEBUG*/
-#define CONFIG_SPL_WATCHDOG_SUPPORT
-#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
-#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_WATCHDOG
+#define CONFIG_SPL_DRIVERS_MISC
+#define CONFIG_SPL_POWER
+#define CONFIG_SPL_I2C
 #define CONFIG_SPL_LDSCRIPT            "arch/arm/cpu/armv8/u-boot-spl.lds"
 #define CONFIG_SPL_STACK               0x187FF0
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_GPIO_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_GPIO
+#define CONFIG_SPL_MMC
 #define CONFIG_SPL_BSS_START_ADDR      0x00180000
 #define CONFIG_SPL_BSS_MAX_SIZE        0x2000  /* 8 KB */
 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
@@ -41,17 +41,10 @@
 #define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #undef CONFIG_DM_MMC
-#undef CONFIG_DM_PMIC
-#undef CONFIG_DM_PMIC_PFUZE100
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 
-#define CONFIG_POWER
+#define CONFIG_POWER_LEGACY
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
@@ -99,9 +92,6 @@
        "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 
 /* Link Definitions */
-#define CONFIG_LOADADDR                        0x40480000
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        0x80000
@@ -112,9 +102,6 @@
 
 #define CONFIG_MMCROOT                 "/dev/mmcblk1p2"  /* USDHC2 */
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          ((CONFIG_ENV_SIZE + (2 * 1024)) * 1024)
-
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE                        0xC0000000 /* 3GB DDR */
@@ -139,13 +126,6 @@
 
 #define CONFIG_MXC_GPIO
 
-/* I2C Configs */
-#define CONFIG_SYS_I2C_SPEED             100000
-
 #define CONFIG_OF_SYSTEM_SETUP
 
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM_PMIC
-#endif
-
 #endif