#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
-#define CONFIG_SYS_BOOTM_LEN (32 * SZ_1M)
-
-#define CONFIG_SPL_MAX_SIZE (148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN SZ_512K
-#define CONFIG_SYS_UBOOT_BASE \
+#define CFG_SYS_UBOOT_BASE \
(QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK 0x980000
-#define CONFIG_SPL_BSS_START_ADDR 0x950000
-#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
-
-/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
-
-#endif
-
-#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
func(MMC, mmc, 2) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
-#endif
/* Initial environment variables */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+/* see include/configs/ti_armv7_common.h */
+#define ENV_MEM_LAYOUT_SETTINGS \
+ "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "kernel_addr_r=0x42000000\0" \
+ "fdt_addr_r=0x48000000\0" \
+ "fdtoverlay_addr_r=0x49000000\0" \
+ "ramdisk_addr_r=0x48080000\0" \
+ "initrd_addr=0x48080000\0" \
+ "scriptaddr=0x40000000\0" \
+ "pxefile_addr_r=0x40100000\0"
+
+#define CFG_EXTRA_ENV_SETTINGS \
"image=Image\0" \
BOOTENV \
- "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
"console=ttymxc1,115200\0" \
- "fdt_addr_r=0x43000000\0" \
"boot_fit=no\0" \
"fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
- "initrd_addr=0x43800000\0" \
"bootm_size=0x10000000\0" \
"mmcpart=1\0" \
- "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+ "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
+ ENV_MEM_LAYOUT_SETTINGS
/* Link Definitions */
-#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
- (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_INIT_RAM_ADDR 0x40000000
+#define CFG_SYS_INIT_RAM_SIZE 0x200000
-#define CONFIG_MMCROOT "/dev/mmcblk1p2" /* USDHC2 */
-#define CONFIG_SYS_SDRAM_BASE 0x40000000
+#define CFG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM 0x40000000
#define PHYS_SDRAM_SIZE 0x80000000 /* 2GB DDR */
-#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 2048
-#define CONFIG_SYS_MAXARGS 64
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-
#endif