Convert CONFIG_SPL_BSS_MAX_SIZE et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / imx8mn_evk.h

diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h
index 985bec8..1d6c92d 100644 (file)
--- a/include/configs/imx8mn_evk.h
+++ b/include/configs/imx8mn_evk.h
@@ -12,17 +12,13 @@
 
 #define CONFIG_SYS_BOOTM_LEN           (32 * SZ_1M)
 
-#define CONFIG_SPL_MAX_SIZE            (148 * 1024)
 #define CONFIG_SYS_MONITOR_LEN         SZ_512K
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
-#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR        0x300
 #define CONFIG_SYS_UBOOT_BASE  \
        (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
 #define CONFIG_SPL_STACK               0x980000
 #define CONFIG_SPL_BSS_START_ADDR      0x950000
-#define CONFIG_SPL_BSS_MAX_SIZE                SZ_8K   /* 8 KB */
 #define CONFIG_SYS_SPL_MALLOC_START    0x42200000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     SZ_512K /* 512 KB */
 
@@ -41,24 +37,29 @@
 #endif
 
 /* Initial environment variables */
+/* see include/configs/ti_armv7_common.h */
+#define ENV_MEM_LAYOUT_SETTINGS \
+       "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "kernel_addr_r=0x42000000\0" \
+       "fdt_addr_r=0x48000000\0" \
+       "fdtoverlay_addr_r=0x49000000\0" \
+       "ramdisk_addr_r=0x48080000\0" \
+       "initrd_addr=0x48080000\0" \
+       "scriptaddr=0x40000000\0" \
+       "pxefile_addr_r=0x40100000\0"
+
 #define CONFIG_EXTRA_ENV_SETTINGS              \
        "image=Image\0" \
        BOOTENV \
-       "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
-       "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
        "console=ttymxc1,115200\0" \
-       "fdt_addr_r=0x43000000\0"                       \
        "boot_fit=no\0" \
        "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
-       "initrd_addr=0x43800000\0"              \
        "bootm_size=0x10000000\0" \
-       "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
-       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+       "mmcpart=1\0" \
+       "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
+       ENV_MEM_LAYOUT_SETTINGS
 
 /* Link Definitions */
-#define CONFIG_LOADADDR                        0x40480000
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
 #define CONFIG_SYS_INIT_RAM_ADDR        0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE        0x200000
@@ -67,32 +68,11 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
        (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_MMCROOT                 "/dev/mmcblk1p2"  /* USDHC2 */
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          SZ_32M
 
 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 #define PHYS_SDRAM                      0x40000000
 #define PHYS_SDRAM_SIZE                        0x80000000 /* 2GB DDR */
 
-#define CONFIG_MXC_UART_BASE           UART2_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_MAXARGS             64
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-
-/* USDHC */
-#define CONFIG_FSL_USDHC
-
-#define CONFIG_SYS_FSL_USDHC_NUM       2
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-
-#define CONFIG_SYS_MMC_IMG_LOAD_PART   1
-
-#define CONFIG_SYS_I2C_SPEED           100000
+#define CONFIG_MXC_UART_BASE           UART_BASE_ADDR(2)
 
 #endif