global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace

[platform/kernel/u-boot.git] / include / configs / imx8mm_data_modul_edm_sbc.h

diff --git a/include/configs/imx8mm_data_modul_edm_sbc.h b/include/configs/imx8mm_data_modul_edm_sbc.h
index 2999e83..dd9f93f 100644 (file)
--- a/include/configs/imx8mm_data_modul_edm_sbc.h
+++ b/include/configs/imx8mm_data_modul_edm_sbc.h
@@ -10,31 +10,16 @@
 #include <linux/stringify.h>
 #include <asm/arch/imx-regs.h>
 
-#define CONFIG_SYS_BOOTM_LEN           SZ_128M
-
-#define CONFIG_SYS_MONITOR_LEN         SZ_1M
-
-#define CONFIG_SPL_STACK               0x920000
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR      0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE                SZ_8K   /* 8 kiB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     SZ_16M  /* 16 MiB */
-
 #define CONFIG_MALLOC_F_ADDR           0x930000
 
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #endif
 
 /* Link Definitions */
 #define CONFIG_SYS_INIT_RAM_ADDR       0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x200000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 #define CONFIG_SYS_SDRAM_BASE          0x40000000
 #define PHYS_SDRAM                     0x40000000
@@ -46,10 +31,8 @@
 #define PHY_ANEG_TIMEOUT               20000
 
 /* USDHC */
-#define CONFIG_SYS_FSL_USDHC_NUM       2
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-
-#if !defined(CONFIG_SPL_BUILD)
+#define CFG_SYS_FSL_USDHC_NUM  2
+#define CFG_SYS_FSL_ESDHC_ADDR 0
 
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "altbootcmd=setenv devpart 2 && run bootcmd ; reset\0"          \
@@ -65,7 +48,6 @@
                "mtd nor0=sf raw 0x0 0x1000000\0"                       \
        "dmo_preboot="                                                  \
                "sf probe ; " /* Scan for SPI NOR, needed by DFU */     \
-               "run dmo_usb_start_hub ; "                              \
                /* Attempt to start USB and Network console */          \
                "run dmo_usb_cdc_acm_start ; "                          \
                "run dmo_netconsole_start\0"                            \
@@ -85,25 +67,6 @@
                                "setenv stdin ${stdin},usbacm ; "       \
                        "fi ; "                                         \
                "fi\0"                                                  \
-       "dmo_usb_start_hub="                                            \
-               "i2c dev 1 ; "                                          \
-               /* Reset the USB USB */                                 \
-               "gpio clear GPIO5_2 ; sleep 0.01 ; " /* t1 > 1us */     \
-               "gpio set GPIO5_2 ; sleep 0.01 ; " /* t5 > 3us */       \
-               /* Write chunks of descriptor into the USB HUB */       \
-               "mw.l 0x7e1000 0x14042417 ; mw.l 0x7e1004 0x9b0bb325 ; "\
-               "mw.l 0x7e1008 0x00000220 ; mw.l 0x7e100c 0x01320100 ; "\
-               "mw.l 0x7e1010 0x00003232 ; mw.l 0x7e1014 0x4d000909 ; "\
-               "i2c write 0x7e1000 0x2c 0x00 0x18 -s ; "               \
-               "mw.l 0x7e1000 0x6300690f ; mw.l 0x7e1004 0x6f007200 ; "\
-               "mw.l 0x7e1008 0x68006300 ; mw.l 0x7e100c 0x70006900 ; "\
-               "i2c write 0x7e1000 0x2c 0x18 0x10 -s ; "               \
-               "mw.l 0x7e1000 0x53005511 ; mw.l 0x7e1004 0x32004200 ; "\
-               "mw.l 0x7e1008 0x31003500 ; mw.l 0x7e100c 0x42003400 ; "\
-               "mw.l 0x7e1010 0x00006900 ; "                           \
-               "i2c write 0x7e1000 0x2c 0x54 0x12 -s ; "               \
-               "mw.l 0x7e1000 0x00000101 ; "                           \
-               "i2c write 0x7e1000 0x2c 0xff 0x2 -s\0"                 \
        "dmo_netconsole_start="                                         \
                "if test \"${dmo_netconsole_enabled}\" = \"true\" ; then "\
                        "setenv autoload false && "                     \
@@ -116,5 +79,3 @@
                "fi"
 
 #endif
-
-#endif