#include <linux/stringify.h>
#include <asm/arch/imx-regs.h>
-#define CONFIG_SYS_BOOTM_LEN SZ_128M
-
#define CONFIG_SYS_MONITOR_LEN SZ_1M
#ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_BSS_START_ADDR 0x910000
-#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M /* 16 MiB */
-
#define CONFIG_MALLOC_F_ADDR 0x930000
/* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
#endif
#define CONFIG_SYS_FSL_USDHC_NUM 2
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#if !defined(CONFIG_SPL_BUILD)
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"altbootcmd=setenv devpart 2 && run bootcmd ; reset\0" \
"bootlimit=3\0" \
"mtd nor0=sf raw 0x0 0x1000000\0" \
"dmo_preboot=" \
"sf probe ; " /* Scan for SPI NOR, needed by DFU */ \
- "run dmo_usb_start_hub ; " \
/* Attempt to start USB and Network console */ \
"run dmo_usb_cdc_acm_start ; " \
"run dmo_netconsole_start\0" \
"setenv stdin ${stdin},usbacm ; " \
"fi ; " \
"fi\0" \
- "dmo_usb_start_hub=" \
- "i2c dev 1 ; " \
- /* Reset the USB USB */ \
- "gpio clear GPIO5_2 ; sleep 0.01 ; " /* t1 > 1us */ \
- "gpio set GPIO5_2 ; sleep 0.01 ; " /* t5 > 3us */ \
- /* Write chunks of descriptor into the USB HUB */ \
- "mw.l 0x7e1000 0x14042417 ; mw.l 0x7e1004 0x9b0bb325 ; "\
- "mw.l 0x7e1008 0x00000220 ; mw.l 0x7e100c 0x01320100 ; "\
- "mw.l 0x7e1010 0x00003232 ; mw.l 0x7e1014 0x4d000909 ; "\
- "i2c write 0x7e1000 0x2c 0x00 0x18 -s ; " \
- "mw.l 0x7e1000 0x6300690f ; mw.l 0x7e1004 0x6f007200 ; "\
- "mw.l 0x7e1008 0x68006300 ; mw.l 0x7e100c 0x70006900 ; "\
- "i2c write 0x7e1000 0x2c 0x18 0x10 -s ; " \
- "mw.l 0x7e1000 0x53005511 ; mw.l 0x7e1004 0x32004200 ; "\
- "mw.l 0x7e1008 0x31003500 ; mw.l 0x7e100c 0x42003400 ; "\
- "mw.l 0x7e1010 0x00006900 ; " \
- "i2c write 0x7e1000 0x2c 0x54 0x12 -s ; " \
- "mw.l 0x7e1000 0x00000101 ; " \
- "i2c write 0x7e1000 0x2c 0xff 0x2 -s\0" \
"dmo_netconsole_start=" \
"if test \"${dmo_netconsole_enabled}\" = \"true\" ; then "\
"setenv autoload false && " \
"fi"
#endif
-
-#endif