global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace

[platform/kernel/u-boot.git] / include / configs / imx8mm-cl-iot-gate.h

diff --git a/include/configs/imx8mm-cl-iot-gate.h b/include/configs/imx8mm-cl-iot-gate.h
index cd1eafd..917d567 100644 (file)
--- a/include/configs/imx8mm-cl-iot-gate.h
+++ b/include/configs/imx8mm-cl-iot-gate.h
@@ -11,26 +11,25 @@
 #include <asm/arch/imx-regs.h>
 #include <config_distro_bootcmd.h>
 
-#define CONFIG_SYS_BOOTM_LEN           (32 * SZ_1M)
-#define CONFIG_SPL_MAX_SIZE            (148 * 1024)
-#define CONFIG_SYS_MONITOR_LEN         SZ_512K
 #define CONFIG_SYS_UBOOT_BASE  \
        (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
 
 #ifdef CONFIG_SPL_BUILD
-#define CONFIG_SPL_STACK               0x920000
-#define CONFIG_SPL_BSS_START_ADDR      0x910000
-#define CONFIG_SPL_BSS_MAX_SIZE                SZ_8K   /* 8 KB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x42200000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     SZ_512K /* 512 KB */
-
 /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
 #define CONFIG_MALLOC_F_ADDR           0x912000
 /* For RAW image gives a error info not panic */
-#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
 
 #endif
 
+/* GUIDs for capsule updatable firmware images */
+#define IMX8MM_CL_IOT_GATE_FIT_IMAGE_GUID \
+       EFI_GUID(0x7a32a939, 0xab92, 0x467b, 0x91, 0x52, \
+                0x74, 0x77, 0x1b, 0x95, 0xe6, 0x46)
+
+#define IMX8MM_CL_IOT_GATE_OPTEE_FIT_IMAGE_GUID \
+       EFI_GUID(0x0bf1165c, 0x1831, 0x4864, 0x94, 0x5e, \
+                0xac, 0x3d, 0x38, 0x48, 0xf4, 0x99)
+
 #if CONFIG_IS_ENABLED(CMD_MMC)
 # define BOOT_TARGET_MMC(func) \
        func(MMC, mmc, 2)      \
@@ -79,7 +78,7 @@
        "bootm_size=0x10000000\0" \
        "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
        "mmcpart=1\0" \
-       "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
+       "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \
        "mmcautodetect=yes\0" \
        "mmcargs=setenv bootargs console=${console} root=${mmcroot}\0 " \
        "loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
@@ -126,39 +125,20 @@
 
 #define CONFIG_SYS_INIT_RAM_ADDR       0x40000000
 #define CONFIG_SYS_INIT_RAM_SIZE       0x80000
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
-#define CONFIG_MMCROOT                 "/dev/mmcblk1p2"  /* USDHC2 */
 
 #define CONFIG_SYS_SDRAM_BASE          0x40000000
 #define PHYS_SDRAM                     0x40000000
 #define PHYS_SDRAM_SIZE                        0x80000000 /* 2GB DDR */
 
-#define CONFIG_MXC_UART_BASE           UART3_BASE_ADDR
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE              2048
-#define CONFIG_SYS_MAXARGS             64
-#define CONFIG_SYS_BARGSIZE            CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + \
-                                       sizeof(CONFIG_SYS_PROMPT) + 16)
-
 /* USDHC */
 
-#define CONFIG_SYS_FSL_USDHC_NUM       2
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
+#define CFG_SYS_FSL_USDHC_NUM  2
+#define CFG_SYS_FSL_ESDHC_ADDR 0
 
 #define CONFIG_FEC_MXC_PHYADDR         0
-#define FEC_QUIRK_ENET_MAC
-
-#define IMX_FEC_BASE                   0x30BE0000
 
 /* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 
 #endif /*__IMX8MM_CL_IOT_GATE_H*/