Convert CONFIG_LBA48 et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / imx7_spl.h

diff --git a/include/configs/imx7_spl.h b/include/configs/imx7_spl.h
index 128f612..5900c05 100644 (file)
--- a/include/configs/imx7_spl.h
+++ b/include/configs/imx7_spl.h
@@ -11,52 +11,12 @@
 #define __IMX7_SPL_CONFIG_H
 
 #ifdef CONFIG_SPL
-/*
- * see figure 6-22 in i.MX 7Dual/Solo Reference manuals:
- *  - IMX7D/S OCRAM free area RAM (OCRAM) is from 0x00910000 to
- *    0x00946C00.
- *  - Set the stack at the end of the free area section, at 0x00946BB8.
- *  - The BOOT ROM loads what they consider the firmware image
- *    which consists of a 4K header in front of us that contains the IVT, DCD
- *    and some padding. However, the manual also states that the ROM uses the
- *    OCRAM_EPCD and OCRAM_PXP areas for itself. While the SPL is free to use
- *    this range for stack and malloc, the SPL itself must fit below 0x920000,
- *    or the image will be truncated in at least some boot modes like USB SDP.
- *    Thus our max size is really 0x00920000 - 0x00912000. If necessary,
- *    CONFIG_SPL_TEXT_BASE could be moved to 0x00911000 to gain 4KB of space
- *    for the SPL, but 56KB should be more than enough for the SPL.
- */
-#define CONFIG_SPL_MAX_SIZE            0xE000
-#define CONFIG_SPL_STACK               0x00946BB8
-/*
- * Pad SPL to 68KB (4KB header + 56KB max size + 8KB extra padding)
- * The extra padding could be removed, but this value was used historically
- * based on an incorrect CONFIG_SPL_MAX_SIZE definition.
- * This allows to write the SPL/U-Boot combination generated with
- * u-boot-with-spl.imx directly to a boot media (given that boot media specific
- * offset is configured properly).
- */
-#define CONFIG_SPL_PAD_TO              0x11000
 
 /* MMC support */
 #if defined(CONFIG_SPL_MMC)
 #define CONFIG_SYS_MONITOR_LEN                 409600  /* 400 KB */
 #endif
 
-/* Define the payload for FAT/EXT support */
-#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
-# ifdef CONFIG_OF_CONTROL
-#  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME      "u-boot-dtb.img"
-# else
-#  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME      "u-boot.img"
-# endif
-#endif
-
-#define CONFIG_SPL_BSS_START_ADDR      0x88200000
-#define CONFIG_SPL_BSS_MAX_SIZE        0x100000                /* 1 MB */
-#define CONFIG_SYS_SPL_MALLOC_START    0x88300000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000                /* 1 MB */
-
 #endif /* CONFIG_SPL */
 
 #endif /* __IMX7_SPL_CONFIG_H */