imx6: Update CONFIG_SPL_STACK defaults in Kconfig
[platform/kernel/u-boot.git] / include / configs / imx6_spl.h
index 86e192f..daf4429 100644 (file)
@@ -8,45 +8,6 @@
 
 #ifdef CONFIG_SPL
 
-#ifdef CONFIG_MX6_OCRAM_256KB
-/*
- * see Figure 8.4.1 in IMX6DQ Reference manuals:
- *  - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093FFFF
- *  - BOOT ROM stack is at 0x0093FFB8
- *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
- *    IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need to
- *    fit between 0x00907000 and 0x00938000.
- *  - Additionally the BOOT ROM loads what they consider the firmware image
- *    which consists of a 4K header in front of us that contains the IVT, DCD
- *    and some padding thus 'our' max size is really 0x00908000 - 0x00938000
- *    or 192KB
- */
-/*
- * Pad SPL to 196KB (4KB header + 192KB max size). This allows to write the
- * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
- * boot media (given that boot media specific offset is configured properly).
- */
-#else
-/*
- * see Figure 8-3 in IMX6SDL Reference manuals:
- *  - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
- *  - BOOT ROM stack is at 0x0091FFB8
- *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
- *    IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
- *    fit between 0x00907000 and 0x00918000.
- *  - Additionally the BOOT ROM loads what they consider the firmware image
- *    which consists of a 4K header in front of us that contains the IVT, DCD
- *    and some padding thus 'our' max size is really 0x00908000 - 0x00918000
- *    or 64KB
- */
-/*
- * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
- * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
- * boot media (given that boot media specific offset is configured properly).
- */
-
-#endif
-
 /* MMC support */
 #if defined(CONFIG_SPL_MMC)
 #define CONFIG_SYS_MONITOR_LEN                 409600  /* 400 KB */