#define __IMX6_SPL_CONFIG_H
#ifdef CONFIG_SPL
-/*
- * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
- * - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
- * - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
- * - BOOT ROM stack is at 0x0091FFB8
- * - if icache/dcache is enabled (eFuse/strapping controlled) then the
- * IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
- * fit between 0x00907000 and 0x00918000.
- * - Additionally the BOOT ROM loads what they consider the firmware image
- * which consists of a 4K header in front of us that contains the IVT, DCD
- * and some padding thus 'our' max size is really 0x00908000 - 0x00918000
- * or 64KB
- */
-#define CONFIG_SPL_MAX_SIZE 0x10000
-#define CONFIG_SPL_STACK 0x0091FFB8
-/*
- * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
- * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
- * boot media (given that boot media specific offset is configured properly).
- */
-#define CONFIG_SPL_PAD_TO 0x11000
/* MMC support */
-#if defined(CONFIG_SPL_MMC_SUPPORT)
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+#if defined(CONFIG_SPL_MMC)
#define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */
#endif
/* SATA support */
-#if defined(CONFIG_SPL_SATA_SUPPORT)
-#define CONFIG_SPL_SATA_BOOT_DEVICE 0
+#if defined(CONFIG_SPL_SATA)
#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
#endif
-/* Define the payload for FAT/EXT support */
-#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
-# ifdef CONFIG_OF_CONTROL
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
-# else
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-# endif
-#endif
-
-#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
- defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
-#define CONFIG_SPL_BSS_START_ADDR 0x88200000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x88300000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
-#else
-#define CONFIG_SPL_BSS_START_ADDR 0x18200000
-#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
-#define CONFIG_SYS_SPL_MALLOC_START 0x18300000
-#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
-#endif
#endif
#endif