Merge tag 'next-20220328' of https://source.denx.de/u-boot/custodians/u-boot-video...

[platform/kernel/u-boot.git] / include / configs / imx6_spl.h

diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 212dee7..234aacb 100644 (file)
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -7,10 +7,32 @@
 #define __IMX6_SPL_CONFIG_H
 
 #ifdef CONFIG_SPL
+
+#ifdef CONFIG_MX6_OCRAM_256KB
 /*
- * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
+ * see Figure 8.4.1 in IMX6DQ Reference manuals:
+ *  - IMX6DQ OCRAM (IRAM) is from 0x00907000 to 0x0093FFFF
+ *  - BOOT ROM stack is at 0x0093FFB8
+ *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
+ *    IMX BOOT ROM will setup MMU table at 0x00938000, therefore we need to
+ *    fit between 0x00907000 and 0x00938000.
+ *  - Additionally the BOOT ROM loads what they consider the firmware image
+ *    which consists of a 4K header in front of us that contains the IVT, DCD
+ *    and some padding thus 'our' max size is really 0x00908000 - 0x00938000
+ *    or 192KB
+ */
+#define CONFIG_SPL_MAX_SIZE            0x30000
+#define CONFIG_SPL_STACK               0x0093FFB8
+/*
+ * Pad SPL to 196KB (4KB header + 192KB max size). This allows to write the
+ * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
+ * boot media (given that boot media specific offset is configured properly).
+ */
+#define CONFIG_SPL_PAD_TO              0x31000
+#else
+/*
+ * see Figure 8-3 in IMX6SDL Reference manuals:
  *  - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
- *  - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
  *  - BOOT ROM stack is at 0x0091FFB8
  *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
  *    IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
@@ -29,14 +51,15 @@
  */
 #define CONFIG_SPL_PAD_TO              0x11000
 
+#endif
+
 /* MMC support */
-#if defined(CONFIG_SPL_MMC_SUPPORT)
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#if defined(CONFIG_SPL_MMC)
 #define CONFIG_SYS_MONITOR_LEN                 409600  /* 400 KB */
 #endif
 
 /* SATA support */
-#if defined(CONFIG_SPL_SATA_SUPPORT)
+#if defined(CONFIG_SPL_SATA)
 #define CONFIG_SPL_SATA_BOOT_DEVICE            0
 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION     1
 #endif