Convert CONFIG_SPL_BSS_START_ADDR to Kconfig

[platform/kernel/u-boot.git] / include / configs / imx6_spl.h

diff --git a/include/configs/imx6_spl.h b/include/configs/imx6_spl.h
index 3d9a7dc..0b0cf9d 100644 (file)
--- a/include/configs/imx6_spl.h
+++ b/include/configs/imx6_spl.h
@@ -7,59 +7,22 @@
 #define __IMX6_SPL_CONFIG_H
 
 #ifdef CONFIG_SPL
-/*
- * see Figure 8-3 in IMX6DQ/IMX6SDL Reference manuals:
- *  - IMX6SDL OCRAM (IRAM) is from 0x00907000 to 0x0091FFFF
- *  - IMX6DQ has 2x IRAM of IMX6SDL but we intend to support IMX6SDL as well
- *  - BOOT ROM stack is at 0x0091FFB8
- *  - if icache/dcache is enabled (eFuse/strapping controlled) then the
- *    IMX BOOT ROM will setup MMU table at 0x00918000, therefore we need to
- *    fit between 0x00907000 and 0x00918000.
- *  - Additionally the BOOT ROM loads what they consider the firmware image
- *    which consists of a 4K header in front of us that contains the IVT, DCD
- *    and some padding thus 'our' max size is really 0x00908000 - 0x00918000
- *    or 64KB
- */
-#define CONFIG_SPL_TEXT_BASE           0x00908000
-#define CONFIG_SPL_MAX_SIZE            0x10000
-#define CONFIG_SPL_STACK               0x0091FFB8
-/*
- * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
- * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
- * boot media (given that boot media specific offset is configured properly).
- */
-#define CONFIG_SPL_PAD_TO              0x11000
 
 /* MMC support */
-#if defined(CONFIG_SPL_MMC_SUPPORT)
-#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION     1
+#if defined(CONFIG_SPL_MMC)
 #define CONFIG_SYS_MONITOR_LEN                 409600  /* 400 KB */
 #endif
 
 /* SATA support */
-#if defined(CONFIG_SPL_SATA_SUPPORT)
-#define CONFIG_SPL_SATA_BOOT_DEVICE            0
+#if defined(CONFIG_SPL_SATA)
 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION     1
 #endif
 
-/* Define the payload for FAT/EXT support */
-#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
-# ifdef CONFIG_OF_CONTROL
-#  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME      "u-boot-dtb.img"
-# else
-#  define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME      "u-boot.img"
-# endif
-#endif
-
 #if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
        defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
-#define CONFIG_SPL_BSS_START_ADDR      0x88200000
-#define CONFIG_SPL_BSS_MAX_SIZE        0x100000                /* 1 MB */
 #define CONFIG_SYS_SPL_MALLOC_START    0x88300000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000                /* 1 MB */
 #else
-#define CONFIG_SPL_BSS_START_ADDR      0x18200000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x100000        /* 1 MB */
 #define CONFIG_SYS_SPL_MALLOC_START    0x18300000
 #define CONFIG_SYS_SPL_MALLOC_SIZE     0x100000        /* 1 MB */
 #endif