Convert CONFIG_USB_MAX_CONTROLLER_COUNT to Kconfig

[platform/kernel/u-boot.git] / include / configs / imx6_logic.h

diff --git a/include/configs/imx6_logic.h b/include/configs/imx6_logic.h
index 63662dd..2913549 100644 (file)
--- a/include/configs/imx6_logic.h
+++ b/include/configs/imx6_logic.h
@@ -17,26 +17,21 @@
 
 #include "mx6_common.h"
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)
-
 /* MMC Configs */
 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
 #define CONFIG_SYS_FSL_USDHC_NUM       2
 
 
 /* Ethernet Configs */
-#define CONFIG_FEC_XCV_TYPE            RMII
-#define CONFIG_ETHPRIME                "FEC"
 #define CONFIG_FEC_MXC_PHYADDR         0
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "script=boot.scr\0" \
        "image=zImage\0" \
        "bootm_size=0x10000000\0" \
-       "fdt_addr_r=0x13000000\0" \
-       "ramdisk_addr_r=0x14000000\0" \
-       "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+       "fdt_addr_r=0x14000000\0" \
+       "ramdisk_addr_r=0x14080000\0" \
+       "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        "ramdisk_file=rootfs.cpio.uboot\0" \
        "boot_fdt=try\0" \
        "ip_dyn=yes\0" \
@@ -111,10 +106,6 @@
                "fi; " \
        "fi; " \
        "else run netboot; fi"
-#define CONFIG_BOOTCOMMAND \
-       "run autoboot"
-
-#define CONFIG_ARP_TIMEOUT     200UL
 
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
@@ -122,45 +113,21 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 /* Environment organization */
 
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_NAND_U_BOOT_START   CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x200000
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00500000
-
-/* MTD device */
-
-/* DMA stuff, needed for GPMI/MXS NAND support */
-
-/* EEPROM  contains serial no, MAC addr and other Logic PD info */
-#define CONFIG_I2C_EEPROM
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC          (PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS           0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT        1 /* Enabled USB controller number */
 #endif
 
 /* Falcon Mode */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME   "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
-#define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
 
 /* Falcon Mode - MMC support: args@1MB kernel@2MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR  0x800   /* 1MB */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR        0x1000  /* 2MB */
 
 #endif                         /* __IMX6LOGIC_CONFIG_H */