MX31: QONG: drop config.mk

[platform/kernel/u-boot.git] / include / configs / igep0030.h

diff --git a/include/configs/igep0030.h b/include/configs/igep0030.h
index 5e2e0ed..92144af 100644 (file)
--- a/include/configs/igep0030.h
+++ b/include/configs/igep0030.h
@@ -53,6 +53,8 @@
 #define CONFIG_INITRD_TAG              1
 #define CONFIG_REVISION_TAG            1
 
+#define CONFIG_OF_LIBFDT               1
+
 /*
  * NS16550 Configuration
  */
@@ -73,8 +75,9 @@
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600, 115200}
+#define CONFIG_GENERIC_MMC             1
 #define CONFIG_MMC                     1
-#define CONFIG_OMAP3_MMC               1
+#define CONFIG_OMAP_HSMMC              1
 #define CONFIG_DOS_PARTITION           1
 
 /* DDR  */
@@ -109,6 +112,7 @@
 #define CONFIG_MTD_DEVICE
 
 #undef CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
+#undef CONFIG_CMD_NFS          /* nfs                          */
 #undef CONFIG_CMD_FLASH                /* flinfo, erase, protect       */
 #undef CONFIG_CMD_IMLS         /* List all found images        */
 
@@ -125,14 +129,61 @@
  */
 #define CONFIG_TWL4030_POWER           1
 
-/* Environment information */
-#define CONFIG_BOOTCOMMAND \
-       "mmc init 0 ; fatload mmc 0 0x80000000 setup.ini ; source \0"
-
 #define CONFIG_BOOTDELAY               3
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
-       "usbtty=cdc_acm\0"
+       "usbtty=cdc_acm\0" \
+       "loadaddr=0x82000000\0" \
+       "usbtty=cdc_acm\0" \
+       "console=ttyS2,115200n8\0" \
+       "mpurate=500\0" \
+       "vram=12M\0" \
+       "dvimode=1024x768MR-16@60\0" \
+       "defaultdisplay=dvi\0" \
+       "mmcdev=0\0" \
+       "mmcroot=/dev/mmcblk0p2 rw\0" \
+       "mmcrootfstype=ext3 rootwait\0" \
+       "nandroot=/dev/mtdblock4 rw\0" \
+       "nandrootfstype=jffs2\0" \
+       "mmcargs=setenv bootargs console=${console} " \
+               "mpurate=${mpurate} " \
+               "vram=${vram} " \
+               "omapfb.mode=dvi:${dvimode} " \
+               "omapfb.debug=y " \
+               "omapdss.def_disp=${defaultdisplay} " \
+               "root=${mmcroot} " \
+               "rootfstype=${mmcrootfstype}\0" \
+       "nandargs=setenv bootargs console=${console} " \
+               "mpurate=${mpurate} " \
+               "vram=${vram} " \
+               "omapfb.mode=dvi:${dvimode} " \
+               "omapfb.debug=y " \
+               "omapdss.def_disp=${defaultdisplay} " \
+               "root=${nandroot} " \
+               "rootfstype=${nandrootfstype}\0" \
+       "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+       "bootscript=echo Running bootscript from mmc ...; " \
+               "source ${loadaddr}\0" \
+       "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+       "mmcboot=echo Booting from mmc ...; " \
+               "run mmcargs; " \
+               "bootm ${loadaddr}\0" \
+       "nandboot=echo Booting from onenand ...; " \
+               "run nandargs; " \
+               "onenand read ${loadaddr} 280000 400000; " \
+               "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+       "if mmc rescan ${mmcdev}; then " \
+               "if run loadbootscript; then " \
+                       "run bootscript; " \
+               "else " \
+                       "if run loaduimage; then " \
+                               "run mmcboot; " \
+                       "else run nandboot; " \
+                       "fi; " \
+               "fi; " \
+       "else run nandboot; fi"
 
 #define CONFIG_AUTO_COMPLETE           1
 
@@ -207,9 +258,12 @@
  * Size of malloc() pool
  */
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (128 << 10))
-#define CONFIG_SYS_GBL_DATA_SIZE       128 /* bytes for initial data */
 
 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR                (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR       0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE       0x800
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_INIT_RAM_ADDR + \
+                                        CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
 
 #endif /* __CONFIG_H */