Fix quoting problem (preboot setting) in many board config files.

[platform/kernel/u-boot.git] / include / configs / idmr.h

diff --git a/include/configs/idmr.h b/include/configs/idmr.h
index b1dbe2c..a15f69a 100644 (file)
--- a/include/configs/idmr.h
+++ b/include/configs/idmr.h
@@ -44,6 +44,8 @@
  */
 #define CONFIG_BOOTCOMMAND     "run net_nfs"
 #define CONFIG_BOOTDELAY       5
+#define CONFIG_MCFUART
+#define CFG_UART_PORT          (0)
 #define CONFIG_BAUDRATE                19200
 #define CFG_BAUDRATE_TABLE     { 9600 , 19200 , 38400 , 57600, 115200 }
 #define CONFIG_ETHADDR         00:06:3b:01:41:55
@@ -55,9 +57,11 @@
 #define CONFIG_NETMASK         255.255.0.0
 #define CONFIG_HOSTNAME                idmr
 #define CONFIG_BOOTFILE                /tftpboot/idmr/uImage
-#define CONFIG_PREBOOT         "echo;echo Type \"run flash_nfs\" to mount root " \
+#define CONFIG_PREBOOT         "echo;echo Type \\\"run flash_nfs\\\" to mount root " \
                                "filesystem over NFS; echo"
 
+#define CONFIG_MCFTMR
+
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "netdev=eth0\0"                                                 \
        "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
@@ -78,18 +82,27 @@
        "u-boot=/tftpboot/idmr/u-boot.bin\0"                            \
        ""
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
- * Commands' definition
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS                ((CONFIG_CMD_DFL                | \
-                                       CFG_CMD_PING            | \
-                                       CFG_CMD_JFFS2           | \
-                                       CFG_CMD_NET)            & \
-                                       ~(CFG_CMD_LOADS         | \
-                                               CFG_CMD_LOADB))
+#include <config_cmd_default.h>
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_LOADB
 
 
 /*
@@ -112,14 +125,16 @@
 #define CFG_ENV_IS_IN_FLASH
 #endif /* !CONFIG_MONITOR_IS_IN_RAM */
 
+#define        CFG_USE_PPCENV                  /* Environment embedded in sect .ppcenv */
+
 #define CFG_PROMPT             "=> "
 #define CFG_LONGHELP                           /* undef to save memory */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024            /* Console I/O Buffer Size */
-#else /* !(CONFIG_COMMANDS & CFG_CMD_KGDB) */
+#else
 #define CFG_CBSIZE             256             /* Console I/O Buffer Size */
-#endif /* (CONFIG_COMMANDS & CFG_CMD_KGDB) */
+#endif
 
 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
 #define CFG_MAXARGS            16              /* max number of command args */
@@ -138,11 +153,27 @@
 /*
  * Ethernet
  */
-#define FEC_ENET
-#define CONFIG_NET_RETRY_COUNT 5
-#define CFG_ENET_BD_BASE       0x480000
-#define CFG_DISCOVER_PHY       1
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+#      define CONFIG_NET_MULTI         1
 #define CONFIG_MII             1
+#      define CFG_DISCOVER_PHY
+#      define CFG_RX_ETH_BUFFER        8
+#      define CFG_FAULT_ECHO_LINK_DOWN
+
+#      define CFG_FEC0_PINMUX          0
+#      define CFG_FEC0_MIIBASE         CFG_FEC0_IOBASE
+#      define MCFFEC_TOUT_LOOP         50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+#      ifndef CFG_DISCOVER_PHY
+#              define FECDUPLEX        FULL
+#              define FECSPEED         _100BASET
+#      else
+#              ifndef CFG_FAULT_ECHO_LINK_DOWN
+#                      define CFG_FAULT_ECHO_LINK_DOWN
+#              endif
+#      endif                   /* CFG_DISCOVER_PHY */
+#endif
 
 /*
  * Definitions for initial stack pointer and data area (in DPRAM)
@@ -177,7 +208,7 @@
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization ??
  */
-#define CFG_BOOTMAPSZ          (8 << 20)       /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ          (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
 
 /* FLASH organization */
 #define CFG_MAX_FLASH_BANKS    1       /* max number of memory banks */
@@ -206,8 +237,8 @@
                                                "2m(rootfs),"   \
                                                "-(user)";
 
-#if (CONFIG_COMMANDS & CFG_CMD_MII)
-#error MII commands don't work on iDMR board and sholud not be enabled.
-#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */
+#if defined(CONFIG_CMD_MII)
+#error "MII commands don't work on iDMR board and should not be enabled."
+#endif
 
 #endif /* _IDMR_H */