Convert CONFIG_BOARD_EARLY_INIT_F to Kconfig

[platform/kernel/u-boot.git] / include / configs / icon.h

diff --git a/include/configs/icon.h b/include/configs/icon.h
index 7a4e60c..29d3365 100644 (file)
--- a/include/configs/icon.h
+++ b/include/configs/icon.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2009-2010
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 /*
@@ -32,9 +16,11 @@
  * High Level Configuration Options
  */
 #define CONFIG_ICON            1               /* Board is icon        */
-#define CONFIG_4xx             1               /* ... PPC4xx family    */
 #define CONFIG_440             1               /* ... PPC440 family    */
 #define CONFIG_440SPE          1               /* Specifc SPe support  */
+
+#define        CONFIG_SYS_TEXT_BASE    0xFFFA0000
+
 #define CONFIG_SYS_CLK_FREQ    33333333        /* external freq to pll */
 #define CONFIG_SYS_4xx_RESET_TYPE 0x2  /* use chip reset on this board */
 
@@ -44,7 +30,6 @@
 #define CONFIG_HOSTNAME                icon
 #include "amcc-common.h"
 
-#define CONFIG_BOARD_EARLY_INIT_F      /* Call board_pre_init  */
 #define CONFIG_BOARD_EARLY_INIT_R      /* Call board_early_init_r */
 
 /*
@@ -52,7 +37,6 @@
  * actual resources get mapped (not physical addresses)
  */
 #define CONFIG_SYS_FLASH_BASE  0xfc000000      /* later mapped to this addr */
-#define CONFIG_SYS_PERIPHERAL_BASE 0xa0000000  /* internal peripherals */
 #define CONFIG_SYS_ISRAM_BASE  0x90000000      /* internal SRAM        */
 
 #define CONFIG_SYS_PCI_MEMBASE 0x80000000      /* mapped PCI memory    */
@@ -95,18 +79,16 @@
 #define CONFIG_SYS_TEMP_STACK_OCM      1
 #define CONFIG_SYS_OCM_DATA_ADDR       CONFIG_SYS_ISRAM_BASE
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_ISRAM_BASE   /* Init RAM */
-#define CONFIG_SYS_INIT_RAM_END                0x2000          /* end used area */
-#define CONFIG_SYS_GBL_DATA_SIZE       128             /* sizeof init data */
+#define CONFIG_SYS_INIT_RAM_SIZE       0x2000          /* size of used area */
 
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - \
-                                        CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_POST_WORD_ADDR      (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
-#define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_POST_WORD_ADDR
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - \
+                                        GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_GBL_DATA_OFFSET - 0x4)
 
 /*
  * Serial Port
  */
-#undef CONFIG_UART1_CONSOLE
+#define CONFIG_CONS_INDEX      1       /* Use UART0                    */
 #undef CONFIG_SYS_EXT_SERIAL_CLOCK
 
 /*
@@ -120,12 +102,10 @@
 /*
  * I2C
  */
-#define CONFIG_SYS_I2C_SPEED   100000  /* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_PPC4XX_SPEED_0  100000
 
-#define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_SPD_BUS_NUM 0       /* The I2C bus for SPD          */
 
-#define CONFIG_SYS_I2C_MULTI_EEPROMS
 #define CONFIG_SYS_I2C_EEPROM_ADDR     0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
@@ -145,18 +125,13 @@
 /*
  * Video options
  */
-#define CONFIG_VIDEO
 
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_SM501
 #define CONFIG_VIDEO_SM501_32BPP
 #define CONFIG_VIDEO_SM501_PCI
 #define VIDEO_FB_LITTLE_ENDIAN
-#define CONFIG_CFB_CONSOLE
 #define CONFIG_VIDEO_LOGO
-#define CONFIG_CONSOLE_EXTRA_INFO
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_VIDEO_SW_CURSOR
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_SPLASH_SCREEN
 #define CFG_CONSOLE_IS_IN_ENV
@@ -186,11 +161,8 @@
  */
 #define CONFIG_CMD_CHIP_CONFIG
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
 #ifdef CONFIG_VIDEO
 #define CONFIG_CMD_BMP
 #endif
@@ -233,8 +205,7 @@
  * PCI stuff
  */
 /* General PCI */
-#define CONFIG_PCI                     /* include pci support          */
-#define CONFIG_PCI_PNP                 /* do pci plug-and-play         */
+#define CONFIG_PCI_INDIRECT_BRIDGE     /* indirect PCI bridge support */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup  */
 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 #define CONFIG_PCI_BOOTDELAY   1000    /* enable pci bootdelay variable*/