powerpc: cpm2 boards: update fcc register logic

[platform/kernel/u-boot.git] / include / configs / hymod.h

diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 5a282ff..8c9f3d1 100644 (file)
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -37,6 +37,8 @@
 #define CONFIG_HYMOD           1       /* ...on a Hymod board          */
 #define CONFIG_CPM2            1       /* Has a CPM2 */
 
+#define        CONFIG_SYS_TEXT_BASE    0x40000000
+
 #define        CONFIG_MISC_INIT_F      1       /* Use misc_init_f()            */
 
 #define CONFIG_BOARD_POSTCLK_INIT      /* have board_postclk_init() function */
@@ -87,8 +89,8 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11)
+# define CONFIG_SYS_CMXFCR_MASK1       (CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE1      (CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE|FCC_PSMR_LPB)
 
@@ -108,8 +110,8 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
+# define CONFIG_SYS_CMXFCR_MASK2       (CMXFCR_FC2|CMXFCR_RF2CS_MSK|CMXFCR_TF2CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE2      (CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE|FCC_PSMR_LPB)
 
@@ -129,8 +131,8 @@
  * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
  * - Enable Full Duplex in FSMR
  */
-# define CONFIG_SYS_CMXFCR_MASK        (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE       (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
+# define CONFIG_SYS_CMXFCR_MASK3       (CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
+# define CONFIG_SYS_CMXFCR_VALUE3      (CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
 # define CONFIG_SYS_CPMFCR_RAMTYPE     0
 # define CONFIG_SYS_FCC_PSMR           (FCC_PSMR_FDE|FCC_PSMR_LPB)
 
@@ -375,9 +377,8 @@
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR       CONFIG_SYS_IMMR
-#define        CONFIG_SYS_INIT_RAM_END 0x4000  /* End of used area in DPRAM    */
-#define        CONFIG_SYS_GBL_DATA_SIZE        128  /* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define        CONFIG_SYS_INIT_RAM_SIZE        0x4000  /* Size of used area in DPRAM   */
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define        CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 
 /*-----------------------------------------------------------------------
@@ -386,8 +387,8 @@
  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
  */
 #define        CONFIG_SYS_SDRAM_BASE           0x00000000
-#define CONFIG_SYS_FLASH_BASE          TEXT_BASE
-#define        CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE          CONFIG_SYS_TEXT_BASE
+#define        CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_FPGA_BASE           0x80000000
 /*
  * unfortunately, CONFIG_SYS_MONITOR_LEN must include the
@@ -728,14 +729,6 @@
 #define FPGA_MAIN_IRQ          SIU_INT_IRQ2
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define        BOOTFLAG_COLD   0x01            /* Normal Power-On: Boot from FLASH*/
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
-/*
  * JFFS2 partitions
  *
  */