Merge branch 'master' of git://git.denx.de/u-boot-sunxi

[platform/kernel/u-boot.git] / include / configs / hrcon.h

diff --git a/include/configs/hrcon.h b/include/configs/hrcon.h
index 95db26c..52e6277 100644 (file)
--- a/include/configs/hrcon.h
+++ b/include/configs/hrcon.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2014
- * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
+ * Dirk Eibach,  Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
  *
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,12 +17,6 @@
 #define CONFIG_MPC8308         1 /* MPC8308 CPU specific */
 #define CONFIG_HRCON           1 /* HRCON board specific */
 
-#define        CONFIG_SYS_TEXT_BASE    0xFE000000
-
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
-
-#define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR      CONFIG_SYS_MPC83xx_ESDHC_ADDR
 
 /*
@@ -209,8 +202,6 @@
  * FLASH on the Local Bus
  */
 #if 1
-#define CONFIG_SYS_FLASH_CFI           /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER                /* use the CFI driver */
 #define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_16BIT
 #define CONFIG_FLASH_CFI_LEGACY
 #define CONFIG_SYS_FLASH_LEGACY_512Kx16
@@ -218,7 +209,6 @@
 
 #define CONFIG_SYS_FLASH_BASE          0xFE000000 /* FLASH base address */
 #define CONFIG_SYS_FLASH_SIZE          8 /* FLASH size is up to 8M */
-#define CONFIG_SYS_FLASH_PROTECTION    1 /* Use h/w Flash protection. */
 
 /* Window base at flash base */
 #define CONFIG_SYS_LBLAWBAR0_PRELIM    CONFIG_SYS_FLASH_BASE
@@ -279,7 +269,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX      2
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -472,14 +461,12 @@ void fpga_control_clear(unsigned int bus, int pin);
 /*
  * TSEC
  */
-#define CONFIG_TSEC_ENET       /* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET        0x24000
 #define CONFIG_SYS_TSEC1       (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
 
 /*
  * TSEC ethernet configuration
  */
-#define CONFIG_MII             1 /* MII PHY management */
 #define CONFIG_TSEC1
 #define CONFIG_TSEC1_NAME      "eTSEC0"
 #define TSEC1_PHY_ADDR         1
@@ -510,13 +497,9 @@ void fpga_control_clear(unsigned int bus, int pin);
  * Command line configuration.
  */
 
-#define CONFIG_CMDLINE_EDITING 1       /* add command line history */
-#define CONFIG_AUTO_COMPLETE           /* add autocompletion support */
-
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR           0x2000000 /* default load address */
 #define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
 
@@ -590,7 +573,7 @@ void fpga_control_clear(unsigned int bus, int pin);
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */
 
 
-#define CONFIG_HOSTNAME                hrcon
+#define CONFIG_HOSTNAME                "hrcon"
 #define CONFIG_ROOTPATH                "/opt/nfsroot"
 #define CONFIG_BOOTFILE                "uImage"