Replace "run load; run update" with conditionalized "run load update".

[platform/kernel/u-boot.git] / include / configs / hcu5.h

diff --git a/include/configs/hcu5.h b/include/configs/hcu5.h
index d66c47a..2ed8530 100644 (file)
--- a/include/configs/hcu5.h
+++ b/include/configs/hcu5.h
@@ -123,7 +123,7 @@
 /* Put the environment in Flash */
 #define CFG_ENV_SECT_SIZE      0x10000 /* size of one complete sector  */
 #define CFG_ENV_ADDR           ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
-#define        CFG_ENV_SIZE            8*1024  /* 8 KB Environment Sector      */
+#define CFG_ENV_SIZE           8*1024  /* 8 KB Environment Sector      */
 
 /* Address and size of Redundant Environment Sector    */
 #define CFG_ENV_ADDR_REDUND    (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
@@ -148,9 +148,9 @@
  * I2C stuff for a ATMEL AT24C16 (2kB holding ENV, we are using the
  * the second internal I2C controller of the PPC440EPx
  *----------------------------------------------------------------------*/
-#define CFG_SPD_BUS_NUM                1
+#define CFG_SPD_BUS_NUM        1
 
-#define CONFIG_HARD_I2C                1       /* I2C with hardware support    */
+#define CONFIG_HARD_I2C        1       /* I2C with hardware support    */
 #undef CONFIG_SOFT_I2C                 /* I2C bit-banged               */
 #define CFG_I2C_SPEED          400000  /* I2C speed and slave address  */
 #define CFG_I2C_SLAVE          0x7F
@@ -182,7 +182,7 @@
 
 #define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
 
-#define        CONFIG_EXTRA_ENV_SETTINGS                                       \
+#define        CONFIG_EXTRA_ENV_SETTINGS                               \
        "netdev=eth0\0"                                                 \
        "loadaddr=0x01000000\0"                                         \
        "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
@@ -197,14 +197,13 @@
                "bootfile=hcu5/uImage\0"                                \
                "rootpath=/home/hcu/eldk/ppc_4xxFP\0"                   \
                "load=tftp 100000 hcu5/u-boot.bin\0"                    \
-       "update=protect off FFFb0000 FFFFFFFF;era FFFb0000 FFFFFFFF;"   \
-               "cp.b 100000 FFFb0000 50000\0"                          \
-       "upd=run load;run update\0"                                     \
-       "vx=tftp ${loadaddr} hcu5/hcu5_vx_rom; run vxboot\0"            \
-       "vxusb=usb start; fatload usb 0 ${loadaddr} vxWorks.st; run vxboot\0" \
-       "vxargs=emac(0,0)c:hcu5/hcu5_vx_rom e=${ipaddr} h=${serverip}"  \
-               " u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0" \
-       "vxboot=setenv bootargs $(vxargs); bootvx ${loadaddr}\0"        \
+       "update=protect off FFFB0000 FFFFFFFF;era FFFB0000 FFFFFFFF;"   \
+               "cp.b 100000 FFFB0000 50000\0"                          \
+       "upd=run load update\0"                                         \
+       "vx_rom=hcu5/hcu5_vx_rom\0"                                     \
+       "vx=tftp ${loadaddr} ${vx_rom};run vxargs; bootvx\0"            \
+       "vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}"       \
+       " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0"        \
        "usbargs=setenv bootargs root=/dev/sda1 ro\0"                   \
        "linux=usb start; ext2load usb 0 ${loadaddr} /boot/uImage;"     \
        "run usbargs addip addtty; bootm\0"                             \
@@ -225,16 +224,16 @@
 #define CONFIG_M88E1111_PHY    1
 #define        CONFIG_IBM_EMAC4_V4     1
 #define CONFIG_MII             1       /* MII PHY management           */
-#define CONFIG_PHY_ADDR                0       /* PHY address, See schematics  */
+#define CONFIG_PHY_ADDR        1       /* PHY address, like on HCU4    */
 
-#define CONFIG_PHY_RESET        1      /* reset phy upon startup         */
+#define CONFIG_PHY_RESET       1       /* reset phy upon startup         */
 
 #define CONFIG_HAS_ETH0
 #define CFG_RX_ETH_BUFFER      32 /* Number of ethernet rx buffers & desc. */
 
 #define CONFIG_NET_MULTI       1
-#define CONFIG_HAS_ETH1                1       /* add support for "eth1addr"   */
-#define CONFIG_PHY1_ADDR       1
+#define CONFIG_HAS_ETH1        1       /* add support for "eth1addr" */
+#define CONFIG_PHY1_ADDR       2
 
 /* USB */
 #define CONFIG_USB_OHCI
@@ -311,7 +310,7 @@
 #define CFG_BARGSIZE           CFG_CBSIZE /* Boot Argument Buffer Size */
 
 #define CFG_MEMTEST_START      0x0400000 /* memtest works on           */
-#define CFG_MEMTEST_END                0x0C00000 /* 4 ... 12 MB in DRAM        */
+#define CFG_MEMTEST_END        0x0C00000 /* 4 ... 12 MB in DRAM        */
 
 #define CFG_LOAD_ADDR          0x100000  /* default load address       */
 #define CFG_EXTBDINFO          1       /* To use extended board_into (bd_t) */
@@ -350,11 +349,11 @@
  * Flash
  *----------------------------------------------------------------------*/
 
-#define CFG_MAX_FLASH_BANKS    1       /* max number of memory banks           */
-#define CFG_MAX_FLASH_SECT     8       /* max number of sectors on one chip    */
+#define CFG_MAX_FLASH_BANKS    1       /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT     8       /* max number of sectors on one chip */
 
-#define CFG_FLASH_ERASE_TOUT   120000  /* Timeout for Flash Erase (in ms)      */
-#define CFG_FLASH_WRITE_TOUT   500     /* Timeout for Flash Write (in ms)      */
+#define CFG_FLASH_ERASE_TOUT   120000  /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT   500     /* Timeout for Flash Write (in ms) */
 
 /*-----------------------------------------------------------------------
  * External Bus Controller (EBC) Setup
@@ -393,14 +392,6 @@
 #define HCU_CPLD_VERSION_REGISTER ( CFG_CPLD + 0x0F00000 )
 #define HCU_HW_VERSION_REGISTER   ( CFG_CPLD + 0x1400000 )
 
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02            /* Software reboot              */
-
 #define CFG_HUSH_PARSER                 /* use "hush" command parser    */
 #ifdef  CFG_HUSH_PARSER
        #define CFG_PROMPT_HUSH_PS2     "> "