/*
- *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
* Niklaus Giger (Niklaus.Giger@netstal.com)
*
* See file CREDITS for list of people who contributed to this
*----------------------------------------------------------------------*/
#define CONFIG_HCU4 1 /* Board is HCU4 */
#define CONFIG_4xx 1 /* ... PPC4xx family */
-#define CONFIG_405GPr 1 /* HCU4 has a 405GPr */
#define CONFIG_405GP 1
#define CONFIG_4xx 1
* Flash
*----------------------------------------------------------------------*/
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
+/* Use common CFI driver */
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER
+/* board provides its own flash_init code */
+#define CONFIG_FLASH_CFI_LEGACY 1
+#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT
+#define CFG_FLASH_LEGACY_512Kx8 1
-#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
+/* print 'E' for empty sector on flinfo */
+#define CFG_FLASH_EMPTY_INFO
-#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
-#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 8 /* max number of sectors on one chip */
/*-----------------------------------------------------------------------
* Environment
#ifdef CFG_ENV_IS_IN_EEPROM
/* Put the environment after the SDRAM configuration */
-#define PROM_SIZE 2048
+#define PROM_SIZE 2048
#define CFG_ENV_OFFSET 512
#define CFG_ENV_SIZE (PROM_SIZE-CFG_ENV_OFFSET)
#endif
#ifdef CFG_ENV_IS_IN_FLASH
/* Put the environment in Flash */
-#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
+#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
#define CFG_ENV_ADDR ((-CFG_MONITOR_LEN)-CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE 8*1024 /* 8 KB Environment Sector */
#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
"echo"
#undef CONFIG_BOOTARGS
#define CFG_TFTP_LOADADDR 0x01000000 /* @16 MB */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"loadaddr=0x01000000\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"bootm\0" \
"rootpath=/home/diagnose/eldk/ppc_4xx\0" \
"bootfile=/tftpboot/hcu4/uImage\0" \
- "load=tftp 100000 hcu4/u-boot.bin\0" \
- "update=protect off FFFB0000 FFFFFFFF;era FFFC0000 FFFFFFFF;" \
+ "load=tftp 100000 hcu4/u-boot.bin\0" \
+ "update=protect off FFFB0000 FFFFFFFF;era FFFB0000 FFFFFFFF;" \
"cp.b 100000 FFFB0000 50000\0" \
- "upd=run load;run update\0" \
- "vx=tftp ${loadaddr} hcu4_vx_rom;" \
- "vx=tftp ${loadaddr} hcu4/hcu4_vx_rom;" \
- "setenv bootargs emac(0,0)c:hcu4/hcu4_vx_rom e=${ipaddr} " \
- "bootvx ${loadaddr}\0" \
+ "upd=run load update\0" \
+ "vx_rom=hcu4/hcu4_vx_rom\0" \
+ "vx=tftp ${loadaddr} ${vx_rom};run vxargs; bootvx\0" \
+ "vxargs=setenv bootargs emac(0,0)c:${vx_rom} e=${ipaddr}" \
+ " h=${serverip} u=dpu pw=netstal8752 tn=hcu5 f=0x3008\0" \
""
#define CONFIG_BOOTCOMMAND "run vx"
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
#define CONFIG_MII 1 /* MII PHY management */
-#define CONFIG_PHY_ADDR 1 /* PHY address */
+#define CONFIG_PHY_ADDR 1 /* PHY address */
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
/* Configuration Port location */
#define CONFIG_PORT_ADDR 0xF0000500
-
-/*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM 0x02 /* Software reboot */
-
#define CFG_HUSH_PARSER /* use "hush" command parser */
#ifdef CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "