#define __CONFIG_H
/* SPL */
+#define CONFIG_SPL_BOARD_INIT
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_FAT_SUPPORT
-/*
-#define CONFIG_SPL_SATA_SUPPORT
-*/
+#define CONFIG_SPL_POWER_SUPPORT
/* Location in NAND to read U-Boot from */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
+
+/* Falcon Mode */
+#define CONFIG_CMD_SPL
+#define CONFIG_SPL_OS_BOOT
+#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
+#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K)
+
+/* Falcon Mode - NAND support: args@17MB kernel@18MB */
+#define CONFIG_CMD_SPL_NAND_OFS (17 * SZ_1M)
+#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
+
+/* Falcon Mode - MMC support: args@1MB kernel@2MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */
+#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
+#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */
#include "imx6_spl.h" /* common IMX6 SPL configuration */
#include "mx6_common.h"
-#define CONFIG_MX6
-#define CONFIG_DISPLAY_CPUINFO /* display cpu info */
-#define CONFIG_DISPLAY_BOARDINFO_LATE /* display board info (after reloc) */
+#undef CONFIG_SPL_EXT_SUPPORT
+#undef CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
-#include <asm/arch/imx-regs.h>
-#include <asm/imx-common/gpio.h>
-
-/* ATAGs */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
+/* Serial ATAG */
#define CONFIG_SERIAL_TAG
-#define CONFIG_REVISION_TAG
-
-#define CONFIG_SYS_GENERIC_BOARD
/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
/* Init Functions */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
-/* GPIO */
-#define CONFIG_MXC_GPIO
+/* Driver Model */
+#ifndef CONFIG_SPL_BUILD
+#define CONFIG_DM_GPIO
+#define CONFIG_DM_THERMAL
+#endif
+
+/* Thermal */
+#define CONFIG_IMX_THERMAL
/* Serial */
#define CONFIG_MXC_UART
#ifdef CONFIG_SPI_FLASH
/* SPI */
-#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SPI_FLASH_MTD
#define CONFIG_SPI_FLASH_BAR
- #define CONFIG_SPI_FLASH_WINBOND
#define CONFIG_SF_DEFAULT_BUS 0
#define CONFIG_SF_DEFAULT_CS 0
/* GPIO 3-19 (21248) */
#else
/* Enable NAND support */
-#define CONFIG_CMD_TIME
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#ifdef CONFIG_CMD_NAND
#endif /* CONFIG_SPI_FLASH */
-/* Flattened Image Tree Suport */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE
-
/* I2C Configs */
-#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_I2C_GSC 0
#define CONFIG_I2C_PMIC 1
#define CONFIG_I2C_EDID
/* MMC Configs */
-#define CONFIG_FSL_ESDHC
-#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 1
-#define CONFIG_MMC
-#define CONFIG_CMD_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_BOUNCE_BUFFER
/* Filesystem support */
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
#define CONFIG_CMD_UBIFS
-#define CONFIG_DOS_PARTITION
/*
* SATA Configs
#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
/* Various command support */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
#define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */
#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_GSC
#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
#define CONFIG_CMD_UBI
#define CONFIG_RBTREE
-#define CONFIG_LZO
-#define CONFIG_CMD_FUSE /* eFUSE read/write support */
-#ifdef CONFIG_CMD_FUSE
-#define CONFIG_MXC_OCOTP
-#endif
-
/* Ethernet support */
#define CONFIG_FEC_MXC
-#define CONFIG_E1000
#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_ARP_TIMEOUT 200UL
/* USB Configs */
-#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_KEYBOARD
-#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
/* USB Mass Storage Gadget */
-#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#define CONFIG_USBDOWNLOAD_GADGET
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
-
-/* Netchip IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0525
-#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
-#define CONFIG_G_DNL_MANUFACTURER "Gateworks"
+#define CONFIG_USB_FUNCTION_MASS_STORAGE
/* Framebuffer and LCD */
#define CONFIG_VIDEO
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
-
-/* serial console (ttymxc1,115200) */
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "Ventana > "
-#define CONFIG_SYS_CBSIZE 1024
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
#define CONFIG_HWCONFIG
+#define CONFIG_PREBOOT
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS 16
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Memory configuration */
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_END 0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
-#define CONFIG_SYS_TEXT_BASE 0x17800000
-#define CONFIG_SYS_LOAD_ADDR 0x12000000
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-/* FLASH and environment organization */
-#define CONFIG_SYS_NO_FLASH /* no NOR flash */
-
/*
* MTD Command for mtdparts
*/
+#define CONFIG_LZO
#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#endif
/* Persistent Environment Config */
-#define CONFIG_ENV_OVERWRITE /* allow to overwrite serial and ethaddr */
#ifdef CONFIG_SPI_FLASH
#define CONFIG_ENV_IS_IN_SPI_FLASH
#else
#define CONFIG_ENV_IS_IN_NAND
#endif
#if defined(CONFIG_ENV_IS_IN_MMC)
- #define CONFIG_ENV_OFFSET (6 * 64 * 1024)
- #define CONFIG_ENV_SIZE (8 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV 0
+ #define CONFIG_ENV_OFFSET (709 * SZ_1K)
+ #define CONFIG_ENV_SIZE (128 * SZ_1K)
+ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
#elif defined(CONFIG_ENV_IS_IN_NAND)
- #define CONFIG_ENV_OFFSET (16 << 20)
- #define CONFIG_ENV_SECT_SIZE (128 << 10)
+ #define CONFIG_ENV_OFFSET (16 * SZ_1M)
+ #define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
- #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
+ #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 * SZ_1K))
#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
- #define CONFIG_ENV_OFFSET (512 * 1024)
- #define CONFIG_ENV_SECT_SIZE (64 * 1024)
- #define CONFIG_ENV_SIZE (8 * 1024)
+ #define CONFIG_ENV_OFFSET (512 * SZ_1K)
+ #define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
+ #define CONFIG_ENV_SIZE (8 * SZ_1K)
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
#endif
/* Environment */
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
#define CONFIG_IPADDR 192.168.1.1
#define CONFIG_SERVERIP 192.168.1.146
-#define HWCONFIG_DEFAULT \
- "hwconfig=rs232;" \
- "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
+ "pcidisable=1\0" \
+ "splashpos=m,m\0" \
+ "usb_pgood_delay=2000\0" \
"console=ttymxc1\0" \
"bootdevs=usb mmc sata flash\0" \
- HWCONFIG_DEFAULT \
+ "hwconfig=_UNKNOWN_\0" \
"video=\0" \
\
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"mtdids=" MTDIDS_DEFAULT "\0" \
+ "disk=0\0" \
+ "part=1\0" \
\
"fdt_high=0xffffffff\0" \
"fdt_addr=0x18000000\0" \
"initrd_high=0xffffffff\0" \
+ "fixfdt=" \
+ "fdt addr ${fdt_addr}\0" \
+ "bootdir=boot\0" \
"loadfdt=" \
- "if ${fsload} ${fdt_addr} boot/${fdt_file}; then " \
- "echo Loaded DTB from boot/${fdt_file}; " \
- "elif ${fsload} ${fdt_addr} boot/${fdt_file1}; then " \
- "echo Loaded DTB from boot/${fdt_file1}; " \
- "elif ${fsload} ${fdt_addr} boot/${fdt_file2}; then " \
- "echo Loaded DTB from boot/${fdt_file2}; " \
+ "if ${fsload} ${fdt_addr} ${bootdir}/${fdt_file}; then " \
+ "echo Loaded DTB from ${bootdir}/${fdt_file}; " \
+ "run fixfdt; " \
+ "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file1}; then " \
+ "echo Loaded DTB from ${bootdir}/${fdt_file1}; " \
+ "run fixfdt; " \
+ "elif ${fsload} ${fdt_addr} ${bootdir}/${fdt_file2}; then " \
+ "echo Loaded DTB from ${bootdir}/${fdt_file2}; " \
+ "run fixfdt; " \
"fi\0" \
\
- "script=boot/6x_bootscript-ventana\0" \
+ "fs=ext4\0" \
+ "script=6x_bootscript-ventana\0" \
"loadscript=" \
- "if ${fsload} ${loadaddr} ${script}; then " \
- "source; " \
+ "if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
+ "source ${loadaddr}; " \
"fi\0" \
\
- "uimage=boot/uImage\0" \
- "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
+ "uimage=uImage\0" \
+ "mmc_root=/dev/mmcblk0p1 rootfstype=${fs} rootwait rw\0" \
"mmc_boot=" \
- "setenv fsload 'ext2load mmc 0:1'; " \
- "mmc dev 0 && mmc rescan && " \
- "run loadscript; " \
- "if ${fsload} ${loadaddr} ${uimage}; then " \
+ "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
+ "mmc dev ${disk} && mmc rescan && " \
+ "setenv dtype mmc; run loadscript; " \
+ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/mmcblk0p1 rootfstype=ext4 " \
+ "root=/dev/mmcblk0p1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"bootm; " \
"fi\0" \
\
"sata_boot=" \
- "setenv fsload 'ext2load sata 0:1'; sata init && " \
- "run loadscript; " \
- "if ${fsload} ${loadaddr} ${uimage}; then " \
+ "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
+ "sata init && " \
+ "setenv dtype sata; run loadscript; " \
+ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/sda1 rootfstype=ext4 " \
+ "root=/dev/sda1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"bootm; " \
"fi; " \
"fi\0" \
"usb_boot=" \
- "setenv fsload 'ext2load usb 0:1'; usb start && usb dev 0 && " \
- "run loadscript; " \
- "if ${fsload} ${loadaddr} ${uimage}; then " \
+ "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
+ "usb start && usb dev ${disk} && " \
+ "setenv dtype usb; run loadscript; " \
+ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/sda1 rootfstype=ext4 " \
+ "root=/dev/sda1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"bootm; " \
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_EXTRA_ENV_SETTINGS_COMMON \
- "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
\
+ "image_rootfs=openwrt-imx6-ventana-rootfs.ubi\0" \
"nand_update=echo Updating NAND from ${serverip}:${image_rootfs}...; " \
"tftp ${loadaddr} ${image_rootfs} && " \
"nand erase.part rootfs && " \
\
"flash_boot=" \
"setenv fsload 'ubifsload'; " \
- "ubi part rootfs && ubifsmount ubi0:rootfs; " \
- "run loadscript; " \
- "if ${fsload} ${loadaddr} ${uimage}; then " \
+ "ubi part rootfs; " \
+ "if ubi check boot; then " \
+ "ubifsmount ubi0:boot; " \
+ "setenv root ubi0:rootfs ubi.mtd=2 " \
+ "rootfstype=squashfs,ubifs; " \
+ "setenv bootdir; " \
+ "elif ubi check rootfs; then " \
+ "ubifsmount ubi0:rootfs; " \
+ "setenv root ubi0:rootfs ubi.mtd=2 " \
+ "rootfstype=ubifs; " \
+ "fi; " \
+ "setenv dtype nand; run loadscript; " \
+ "if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=ubi0:rootfs ubi.mtd=2 " \
- "rootfstype=ubifs ${video} ${extra}; " \
- "if run loadfdt && fdt addr ${fdt_addr}; then " \
+ "root=${root} ${video} ${extra}; " \
+ "if run loadfdt; then " \
"ubifsumount; " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"else " \
"done"
/* Device Tree Support */
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_OF_LIBFDT
#define CONFIG_FDT_FIXUP_PARTITIONS
-#ifndef CONFIG_SYS_DCACHE_OFF
- #define CONFIG_CMD_CACHE
-#endif
-
#endif /* __CONFIG_H */