Convert CONFIG_SYS_NAND_U_BOOT_LOCATIONS et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / gw_ventana.h

diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 5754b6a..3f6afc1 100644 (file)
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -8,7 +8,6 @@
 
 /* SPL */
 /* Location in NAND to read U-Boot from */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * SZ_1M)
 
 /* Falcon Mode */
 #define CONFIG_SYS_SPL_ARGS_ADDR       0x18000000
@@ -24,27 +23,16 @@
 #include "imx6_spl.h"                  /* common IMX6 SPL configuration */
 #include "mx6_common.h"
 
-#define CONFIG_MACH_TYPE       4520   /* Gateworks Ventana Platform */
-
-/* Serial ATAG */
-#define CONFIG_SERIAL_TAG
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)
-
 /* Serial */
 #define CONFIG_MXC_UART_BASE          UART2_BASE
 
 /* NAND */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 
+#undef CONFIG_SYS_BOOTM_LEN
+#define CONFIG_SYS_BOOTM_LEN           (64 << 20)
+
 /* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_I2C_GSC                 0
 #define CONFIG_I2C_EDID
 
@@ -65,16 +53,12 @@
  * PCI express
  */
 #ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_PCI_FIXUP_DEV
 #define CONFIG_PCIE_IMX
 #endif
 
 /*
  * PMIC
  */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 #define CONFIG_POWER_LTC3676
@@ -82,13 +66,6 @@
 
 /* Various command support */
 
-/* Ethernet support */
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE             ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE      RGMII
-#define CONFIG_FEC_MXC_PHYADDR   0
-#define CONFIG_ARP_TIMEOUT       200UL
-
 /* USB Configs */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET  /* For OTG port */
 #define CONFIG_MXC_USB_PORTSC     (PORT_PTS_UTMI | PORT_PTS_PTW)
@@ -129,7 +106,6 @@
 #define CONFIG_SERVERIP           192.168.1.146
 
 #define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
-       "pcidisable=1\0" \
        "splashpos=m,m\0" \
        "usb_pgood_delay=2000\0" \
        "console=ttymxc1\0" \