+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2013 Gateworks Corporation
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* SPL */
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_MMC_SUPPORT
-#define CONFIG_SPL_POWER_SUPPORT
/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * SZ_1M)
/* Falcon Mode */
-#define CONFIG_CMD_SPL
-#define CONFIG_SPL_OS_BOOT
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
-#define CONFIG_CMD_SPL_WRITE_SIZE (128 * SZ_1K)
/* Falcon Mode - NAND support: args@17MB kernel@18MB */
-#define CONFIG_CMD_SPL_NAND_OFS (17 * SZ_1M)
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS (18 * SZ_1M)
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#include "imx6_spl.h" /* common IMX6 SPL configuration */
#include "mx6_common.h"
-#undef CONFIG_SPL_EXT_SUPPORT
#define CONFIG_MACH_TYPE 4520 /* Gateworks Ventana Platform */
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
/* Init Functions */
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_MISC_INIT_R
/* Driver Model */
#ifndef CONFIG_SPL_BUILD
/* SPI */
#ifdef CONFIG_CMD_SF
- #define CONFIG_MXC_SPI
#define CONFIG_SPI_FLASH_MTD
- #define CONFIG_SPI_FLASH_BAR
- #define CONFIG_SF_DEFAULT_BUS 0
- #define CONFIG_SF_DEFAULT_CS 0
/* GPIO 3-19 (21248) */
- #define CONFIG_SF_DEFAULT_SPEED 30000000
- #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#endif
-#else
+#elif defined(CONFIG_SPL_NAND_SUPPORT)
/* Enable NAND support */
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_NAND_TRIMFFS
#ifdef CONFIG_CMD_NAND
- #define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
/* DMA stuff, needed for GPMI/MXS NAND support */
- #define CONFIG_APBH_DMA
- #define CONFIG_APBH_DMA_BURST
- #define CONFIG_APBH_DMA_BURST8
#endif
#endif /* CONFIG_SPI_FLASH */
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_I2C_GSC 0
-#define CONFIG_I2C_PMIC 1
#define CONFIG_I2C_EDID
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_SYS_FSL_USDHC_NUM 1
-
-/* Filesystem support */
-#define CONFIG_CMD_UBIFS
/*
* SATA Configs
*/
-#define CONFIG_CMD_SATA
#ifdef CONFIG_CMD_SATA
- #define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
#define CONFIG_DWC_AHSATA_PORT_ID 0
#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
- #define CONFIG_LIBATA
#endif
/*
* PCI express
*/
-#define CONFIG_CMD_PCI
#ifdef CONFIG_CMD_PCI
-#define CONFIG_PCI
-#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCI_FIXUP_DEV
#define CONFIG_PCIE_IMX
#define CONFIG_POWER_LTC3676_I2C_ADDR 0x3c
/* Various command support */
-#define CONFIG_CMD_BMODE /* set eFUSE shadow for a boot dev and reset */
-#define CONFIG_CMD_HDMIDETECT /* detect HDMI output device */
-#define CONFIG_CMD_GSC
-#define CONFIG_CMD_EECONFIG /* Gateworks EEPROM config cmd */
-#define CONFIG_CMD_UBI
-#define CONFIG_RBTREE
+#define CONFIG_CMD_UNZIP /* gzwrite */
/* Ethernet support */
#define CONFIG_FEC_MXC
-#define CONFIG_MII
#define IMX_FEC_BASE ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE RGMII
#define CONFIG_FEC_MXC_PHYADDR 0
-#define CONFIG_PHYLIB
#define CONFIG_ARP_TIMEOUT 200UL
/* USB Configs */
-#define CONFIG_USB_EHCI
-#define CONFIG_USB_EHCI_MX6
-#define CONFIG_USB_STORAGE
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_KEYBOARD
#define CONFIG_USBD_HS
-#define CONFIG_USB_ETHER
-#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE
-#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
-
-/* USB Mass Storage Gadget */
-#define CONFIG_USB_FUNCTION_MASS_STORAGE
/* Framebuffer and LCD */
-#define CONFIG_VIDEO
-#define CONFIG_VIDEO_IPUV3
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
-#define CONFIG_IPUV3_CLK 260000000
-#define CONFIG_CMD_HDMIDETECT
-#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP
+#define CONFIG_VIDEO_BMP_LOGO
+#define CONFIG_SPLASH_SCREEN_ALIGN
+#define CONFIG_HIDE_LOGO_VERSION /* Custom config to hide U-boot version */
/* Miscellaneous configurable options */
#define CONFIG_HWCONFIG
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_PREBOOT
/* Memory configuration */
#define CONFIG_SYS_MEMTEST_START 0x10000000
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
/*
* MTD Command for mtdparts
*/
-#define CONFIG_LZO
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#ifdef CONFIG_SPI_FLASH
-#define MTDIDS_DEFAULT "nor0=nor"
-#define MTDPARTS_DEFAULT \
- "mtdparts=nor:512k(uboot),64k(env),2m(kernel),-(rootfs)"
-#else
-#define MTDIDS_DEFAULT "nand0=nand"
-#define MTDPARTS_DEFAULT "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
-#endif
/* Persistent Environment Config */
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#else
-#define CONFIG_ENV_IS_IN_NAND
-#endif
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 0
+ #define CONFIG_SYS_MMC_ENV_PART 1
#define CONFIG_ENV_OFFSET (709 * SZ_1K)
#define CONFIG_ENV_SIZE (128 * SZ_1K)
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (128 * SZ_1K))
#define CONFIG_ENV_OFFSET (512 * SZ_1K)
#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
#define CONFIG_ENV_SIZE (8 * SZ_1K)
- #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
- #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
- #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
- #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
#endif
/* Environment */
#define CONFIG_IPADDR 192.168.1.1
#define CONFIG_SERVERIP 192.168.1.146
-#define HWCONFIG_DEFAULT \
- "hwconfig=rs232;" \
- "dio0:mode=gpio;dio1:mode=gpio;dio2:mode=gpio;dio3:mode=gpio\0" \
#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
+ "pcidisable=1\0" \
+ "splashpos=m,m\0" \
"usb_pgood_delay=2000\0" \
"console=ttymxc1\0" \
"bootdevs=usb mmc sata flash\0" \
- HWCONFIG_DEFAULT \
+ "hwconfig=_UNKNOWN_\0" \
"video=\0" \
\
- "mtdparts=" MTDPARTS_DEFAULT "\0" \
- "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+ "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"disk=0\0" \
"part=1\0" \
\
"run fixfdt; " \
"fi\0" \
\
+ "fs=ext4\0" \
"script=6x_bootscript-ventana\0" \
"loadscript=" \
"if ${fsload} ${loadaddr} ${bootdir}/${script}; then " \
- "source; " \
+ "source ${loadaddr}; " \
"fi\0" \
\
"uimage=uImage\0" \
- "mmc_root=/dev/mmcblk0p1 rootfstype=ext4 rootwait rw\0" \
+ "mmc_root=mmcblk0p1\0" \
"mmc_boot=" \
- "setenv fsload \"ext2load mmc ${disk}:${part}\"; " \
+ "setenv fsload \"${fs}load mmc ${disk}:${part}\"; " \
"mmc dev ${disk} && mmc rescan && " \
"setenv dtype mmc; run loadscript; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/mmcblk0p1 rootfstype=ext4 " \
+ "root=/dev/${mmc_root} rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
"if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"fi\0" \
\
"sata_boot=" \
- "setenv fsload \"ext2load sata ${disk}:${part}\"; " \
+ "setenv fsload \"${fs}load sata ${disk}:${part}\"; " \
"sata init && " \
"setenv dtype sata; run loadscript; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/sda1 rootfstype=ext4 " \
+ "root=/dev/sda1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
"if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"fi; " \
"fi\0" \
"usb_boot=" \
- "setenv fsload \"ext2load usb ${disk}:${part}\"; " \
+ "setenv fsload \"${fs}load usb ${disk}:${part}\"; " \
"usb start && usb dev ${disk} && " \
"setenv dtype usb; run loadscript; " \
"if ${fsload} ${loadaddr} ${bootdir}/${uimage}; then " \
"setenv bootargs console=${console},${baudrate} " \
- "root=/dev/sda1 rootfstype=ext4 " \
+ "root=/dev/sda1 rootfstype=${fs} " \
"rootwait rw ${video} ${extra}; " \
"if run loadfdt; then " \
"bootm ${loadaddr} - ${fdt_addr}; " \
"if run ${btype}_boot; then; fi; " \
"done"
-/* Device Tree Support */
-#define CONFIG_FDT_FIXUP_PARTITIONS
-
#endif /* __CONFIG_H */