#define __CONFIG_H
/* Enable debug prints */
-#undef DEBUG /* General debug */
#undef DEBUG_BOOTP_EXT /* Debug received vendor fields */
/* What is the oscillator's (UX2) frequency in Hz? */
* Monitor Stack Buffer (0x80)
* 0x00F5 FFB0 Board Info Data
* 0x00F6 0000 Malloc Arena
- * : CFG_ENV_SECT_SIZE, 256k
+ * : CONFIG_ENV_SECT_SIZE, 256k
* : CFG_MALLOC_LEN, 128k
* 0x00FC 0000 RAM Copy of Monitor Code
* : CFG_MONITOR_LEN, 256k
* Monitor Stack Buffer (0x80)
* 0x03F5 FFB0 Board Info Data
* 0x03F6 0000 Malloc Arena
- * : CFG_ENV_SECT_SIZE, 256k
+ * : CONFIG_ENV_SECT_SIZE, 256k
* : CFG_MALLOC_LEN, 128k
* 0x03FC 0000 RAM Copy of Monitor Code
* : CFG_MONITOR_LEN, 256k
* for FCC)
*
* if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CFG_CMD_NET must be removed
- * from CONFIG_COMMANDS to remove support for networking.
+ * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
*/
#undef CONFIG_ETHER_ON_SCC
* put in the same sector as U-Boot, and changing variables
* will erase U-Boot temporarily
*/
-#define CFG_ENV_IN_OWN_SECT
+#define CONFIG_ENV_IN_OWN_SECT
/* Define to allow the user to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
* To stop use: " "
*/
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "Autobooting in %d seconds, press \" \" to stop\n"
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Autobooting in %d seconds, press \" \" to stop\n", bootdelay
#define CONFIG_AUTOBOOT_STOP_STR " "
#undef CONFIG_AUTOBOOT_DELAY_STR
#define DEBUG_BOOTKEYS 0
-/* Add support for a few extra bootp options like:
- * - File size
- * - DNS
+/*
+ * BOOTP options
*/
-#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | \
- CONFIG_BOOTP_BOOTFILESIZE | \
- CONFIG_BOOTP_DNS)
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_DNS
/* undef this to save memory */
#define CFG_LONGHELP
/* Monitor Command Prompt */
#define CFG_PROMPT "=> "
-/* What U-Boot subsytems do you want enabled? */
-#define CONFIG_COMMANDS (((CONFIG_CMD_DFL & ~(CFG_CMD_KGDB))) | \
- CFG_CMD_BEDBUG | \
- CFG_CMD_ELF | \
- CFG_CMD_ASKENV | \
- CFG_CMD_REGINFO | \
- CFG_CMD_IMMAP | \
- CFG_CMD_MII)
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+
+#undef CONFIG_CMD_KGDB
+
/* Where do the internal registers live? */
#define CFG_IMMR 0xf0000000
#define CONFIG_GW8260 1 /* on an GW8260 Board */
#define CONFIG_CPM2 1 /* Has a CPM2 */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
/*
* Miscellaneous configurable options
*/
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
#else
# define CFG_CBSIZE 256 /* Console I/O Buffer Size */
#define CFG_MEM_END_USAGE ( CFG_MONITOR_LEN \
+ CFG_MALLOC_LEN \
- + CFG_ENV_SECT_SIZE \
+ + CONFIG_ENV_SECT_SIZE \
+ CFG_STACK_USAGE )
#define CFG_MEMTEST_END ( CFG_SDRAM_SIZE * 1024 * 1024 \
#define CFG_FLASH_ERASE_TOUT 8000 /* Timeout for Flash Erase (in ms) */
#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */
-#define CFG_ENV_IS_IN_FLASH 1
+#define CONFIG_ENV_IS_IN_FLASH 1
-#ifdef CFG_ENV_IN_OWN_SECT
-# define CFG_ENV_ADDR (CFG_MONITOR_BASE + (256 * 1024))
-# define CFG_ENV_SECT_SIZE (256 * 1024)
+#ifdef CONFIG_ENV_IN_OWN_SECT
+# define CONFIG_ENV_ADDR (CFG_MONITOR_BASE + (256 * 1024))
+# define CONFIG_ENV_SECT_SIZE (256 * 1024)
#else
-# define CFG_ENV_SIZE (16 * 1024)/* Size of Environment Sector */
-# define CFG_ENV_ADD ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) - CFG_ENV_SIZE)
-# define CFG_ENV_SECT_SIZE (256 * 1024)/* see README - env sect real size */
-#endif /* CFG_ENV_IN_OWN_SECT */
+# define CONFIG_ENV_SIZE (16 * 1024)/* Size of Environment Sector */
+# define CONFIG_ENV_ADD ((CFG_MONITOR_BASE + CFG_MONITOR_LEN) - CONFIG_ENV_SIZE)
+# define CONFIG_ENV_SECT_SIZE (256 * 1024)/* see README - env sect real size */
+#endif /* CONFIG_ENV_IN_OWN_SECT */
/*-----------------------------------------------------------------------
* Cache Configuration
*/
#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif