/* CPU / AMBA BUS configuration */
#define CONFIG_SYS_CLK_FREQ 40000000 /* 40MHz */
-/* Number of SPARC register windows */
-#define CONFIG_SYS_SPARC_NWINDOWS 8
-
/*
* Serial console configuration
*/
/*
* Supported commands
*/
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_AMBAPP
-#define CONFIG_CMD_PING
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_IRQ
/*
* Autobooting
*/
-#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
#define CONFIG_PREBOOT "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
/***** Gaisler GRLIB IP-Cores Config ********/
-/* AMBA Plug & Play info display on startup */
-/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
-
#define CONFIG_SYS_GRLIB_SDRAM 0
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
/* See, GRLIB Docs (grip.pdf) on how to set up
* These the memory controller registers.
*/
-#define CONFIG_SYS_GRLIB_MEMCFG1 (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_MEMCFG2 0x82206000
-#define CONFIG_SYS_GRLIB_MEMCFG3 0x00136000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x82206000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00136000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x000000ff | (1<<11))
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x82206000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x00136000
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x000000ff | (1<<11))
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x82206000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00136000
/* no DDR controller */
-#define CONFIG_SYS_GRLIB_DDR_CFG 0x00000000
+#undef CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
/* no DDR2 Controller */
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
-
-/* Calculate scaler register value from default baudrate */
-#define CONFIG_SYS_GRLIB_APBUART_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
-
-/* Identification string */
-#define CONFIG_IDENT_STRING "GAISLER LEON3 GR-XC3S-1500"
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
/* default kernel command line */
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"