* (C) Copyright 2008
* Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H__
#define __CONFIG_H__
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO
+
/*
* High Level Configuration Options
* (easy to change)
*/
-#define CONFIG_LEON3 /* This is an LEON3 CPU */
-#define CONFIG_LEON 1 /* This is an LEON CPU */
/* Altera NIOS Development board, Stratix II board */
#define CONFIG_GR_EP2S60 1
/* CPU / AMBA BUS configuration */
#define CONFIG_SYS_CLK_FREQ 96000000 /* 96MHz */
-/* Number of SPARC register windows */
-#define CONFIG_SYS_SPARC_NWINDOWS 8
-
/* Define this is the GR-2S60-MEZZ mezzanine is available and you
* want to use the USB and GRETH functionality of the board
*/
/*
* Supported commands
*/
-#include <config_cmd_default.h>
-
#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_AMBAPP
#define CONFIG_CMD_PING
#define CONFIG_CMD_DIAG
#define CONFIG_CMD_IRQ
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
"net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \
"scratch=40800000\0" \
- "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \
+ "getkernel=tftpboot $(scratch) $(bootfile)\0" \
"bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.207:192.168.0.20:192.168.0.1:255.255.255.0:ml401:eth0\0" \
""
#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_SERVERIP 192.168.0.20
#define CONFIG_IPADDR 192.168.0.207
-#define CONFIG_ROOTPATH /export/rootfs
+#define CONFIG_ROOTPATH "/export/rootfs"
#define CONFIG_HOSTNAME ml401
-#define CONFIG_BOOTFILE /uImage
+#define CONFIG_BOOTFILE "/uImage"
#define CONFIG_BOOTCOMMAND "run flash_self"
#ifndef USE_GRETH
/* USE SMC91C111 MAC */
-#define CONFIG_NET_MULTI
#define CONFIG_SMC91111 1
#define CONFIG_SMC91111_BASE 0x20000300 /* chip select 3 */
#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */
#else
/* USE GRETH Ethernet Driver */
-#define CONFIG_NET_MULTI 1
#define CONFIG_GRETH 1
-
-/* Default GRETH Ethernet HARDWARE address */
-#define GRETH_HWADDR_0 0x00
-#define GRETH_HWADDR_1 0x00
-#define GRETH_HWADDR_2 0x7a
-#define GRETH_HWADDR_3 0xcc
-#define GRETH_HWADDR_4 0x00
-#define GRETH_HWADDR_5 0x13
#endif
-#define CONFIG_ETHADDR 00:00:7a:cc:00:13
#define CONFIG_PHY_ADDR 0x00
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*-----------------------------------------------------------------------
* USB stuff
*-----------------------------------------------------------------------
/***** Gaisler GRLIB IP-Cores Config ********/
-/* AMBA Plug & Play info display on startup */
-/*#define CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP*/
-
#define CONFIG_SYS_GRLIB_SDRAM 0
+/* No SDRAM Configuration */
+#undef CONFIG_SYS_GRLIB_GAISLER_SDCTRL1
+
/* See, GRLIB Docs (grip.pdf) on how to set up
* These the memory controller registers.
*/
-#define CONFIG_SYS_GRLIB_MEMCFG1 (0x10f800ff | (1<<11))
-#define CONFIG_SYS_GRLIB_MEMCFG2 0x00000000
-#define CONFIG_SYS_GRLIB_MEMCFG3 0x00000000
-
-#define CONFIG_SYS_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11))
-#define CONFIG_SYS_GRLIB_FT_MEMCFG2 0x00000000
-#define CONFIG_SYS_GRLIB_FT_MEMCFG3 0x00000000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG1 (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG2 0x00000000
+#define CONFIG_SYS_GRLIB_ESA_MCTRL1_CFG3 0x00000000
-#define CONFIG_SYS_GRLIB_DDR_CFG 0xa900830a
+/* GRLIB FT-MCTRL configuration */
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG1 (0x10f800ff | (1<<11))
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG2 0x00000000
+#define CONFIG_SYS_GRLIB_GAISLER_FTMCTRL1_CFG3 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG1 0x00000000
-#define CONFIG_SYS_GRLIB_DDR2_CFG3 0x00000000
+/* DDR controller */
+#define CONFIG_SYS_GRLIB_GAISLER_DDRSPA1
+#define CONFIG_SYS_GRLIB_GAISLER_DDRSPA1_CTRL 0xa900830a
-/* Calculate scaler register value from default baudrate */
-#define CONFIG_SYS_GRLIB_APBUART_SCALER \
- ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10)
+/* no DDR2 Controller */
+#undef CONFIG_SYS_GRLIB_GAISLER_DDR2SPA1
/* Identification string */
-#define CONFIG_IDENT_STRING "GAISLER LEON3 EP2S60"
+#define CONFIG_IDENT_STRING " Gaisler LEON3 EP2S60"
/* default kernel command line */
#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0"