/*
* (C) Copyright 2011
* eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ * Written-by: Ajay Bhargav <contact@8051projects.net>
*
* Based on Aspenite:
* (C) Copyright 2010
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
* Contributor: Mahavir Jain <mjain@marvell.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_GPLUGD_H
#define __CONFIG_GPLUGD_H
/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nMarvell-gplugD"
-
-/*
* High Level Configuration Options
*/
#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
#define CONFIG_ARMADA100 1 /* SOC Family Name */
#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
-#define CONFIG_MACH_SHEEVAD /* Machine type */
+#define CONFIG_MACH_TYPE MACH_TYPE_GPLUGD /* Machine type */
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
#define CONFIG_SYS_TEXT_BASE 0x00f00000
/*
* Commands configuration
*/
-#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_AUTOSCRIPT
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
+
+/* Disable DCACHE */
+#define CONFIG_SYS_DCACHE_OFF
+
+/* Network configuration */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_ARMADA100_FEC
+
+/* DHCP Support */
+#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
+#endif /* CONFIG_CMD_NET */
+
+/* GPIO Support */
+#define CONFIG_MARVELL_GPIO
+
+/* PHY configuration */
+#define CONFIG_MII
+#define CONFIG_RESET_PHY_R
+/* 88E3015 register definition */
+#define PHY_LED_PAR_SEL_REG 22
+#define PHY_LED_MAN_REG 25
+#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
+/* GPIO Configuration for PHY */
+#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
+
+/* Flash Support */
/*
* mv-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
#include "mv-common.h"
-#undef CONFIG_ARCH_MISC_INIT
#ifdef CONFIG_SYS_NS16550_COM1
#undef CONFIG_SYS_NS16550_COM1
/*
* Environment variables configurations
*/
-#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
-#define CONFIG_ENV_SIZE 0x20000 /* 64k */
+#define CONFIG_ENV_SIZE 0x4000
+
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI_ARMADA100
+#define CONFIG_EHCI_IS_TDI
+#endif /* CONFIG_CMD_USB */
+
+#define CONFIG_SUPPORT_VFAT
#endif /* __CONFIG_GPLUGD_H */