disk: convert CONFIG_ISO_PARTITION to Kconfig

[platform/kernel/u-boot.git] / include / configs / gplugd.h

diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
index 9813309..7f84f7f 100644 (file)
--- a/include/configs/gplugd.h
+++ b/include/configs/gplugd.h
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2011
  * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ * Written-by: Ajay Bhargav <contact@8051projects.net>
  *
  * Based on Aspenite:
  * (C) Copyright 2010
@@ -9,23 +9,7 @@
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  * Contributor: Mahavir Jain <mjain@marvell.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_GPLUGD_H
@@ -42,11 +26,6 @@
 #endif
 
 /*
- * Version number information
- */
-#define CONFIG_IDENT_STRING    "\nMarvell-gplugD"
-
-/*
  * High Level Configuration Options
  */
 #define CONFIG_SHEEVA_88SV331xV5       1       /* CPU Core subversion */
@@ -68,21 +47,15 @@
  * Commands configuration
  */
 #define CONFIG_SYS_NO_FLASH            /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_AUTOSCRIPT
-#undef CONFIG_CMD_FPGA
 
 /* Disable DCACHE */
 #define CONFIG_SYS_DCACHE_OFF
 
 /* Network configuration */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PING
 #define CONFIG_ARMADA100_FEC
 
 /* DHCP Support */
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY                50000
 #endif /* CONFIG_CMD_NET */
 
@@ -91,7 +64,6 @@
 
 /* PHY configuration */
 #define CONFIG_MII
-#define CONFIG_CMD_MII
 #define CONFIG_RESET_PHY_R
 /* 88E3015 register definition */
 #define PHY_LED_PAR_SEL_REG            22
@@ -100,21 +72,13 @@
 /* GPIO Configuration for PHY */
 #define CONFIG_SYS_GPIO_PHY_RST                104     /* GPIO104 */
 
-/* SPI Support */
-#define CONFIG_ARMADA100_SPI
-#define CONFIG_ENV_SPI_CS              110
-#define CONFIG_SYS_SSP_PORT            2
-
 /* Flash Support */
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_ATMEL
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
  */
 #include "mv-common.h"
-#undef CONFIG_ARCH_MISC_INIT
 
 #ifdef CONFIG_SYS_NS16550_COM1
 #undef CONFIG_SYS_NS16550_COM1
@@ -125,13 +89,15 @@
 /*
  * Environment variables configurations
  */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SECT_SIZE           0x4000
+#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE                        0x4000
-#define CONFIG_ENV_OFFSET              0x07C000
 
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_EDITENV
-#define CONFIG_CMD_SAVEENV
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_ARMADA100
+#define CONFIG_EHCI_IS_TDI
+#endif /* CONFIG_CMD_USB */
+
+#define CONFIG_SUPPORT_VFAT
 
 #endif /* __CONFIG_GPLUGD_H */