+/* SPDX-License-Identifier: GPL-2.0+ */
/*
+ * Copyright (C) 2022 Tony Dinh <mibodhi@gmai.com>
* Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
*
* Based on dockstar.h originally written by
* Prafulla Wadaskar <prafulla@marvell.com>
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
*/
#ifndef _CONFIG_GOFLEXHOME_H
#define _CONFIG_GOFLEXHOME_H
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nSeagate GoFlex Home"
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
-#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
-#define CONFIG_KW88F6281 1 /* SOC Name */
-#define CONFIG_MACH_GOFLEXHOME /* Machine type */
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+#include <linux/bitops.h>
/*
* Default GPIO configuration and LED status
*/
#define GOFLEXHOME_OE_LOW (~(0))
#define GOFLEXHOME_OE_HIGH (~(0))
-#define GOFLEXHOME_OE_VAL_LOW (1 << 29) /* USB_PWEN low */
-#define GOFLEXHOME_OE_VAL_HIGH (1 << 17) /* LED pin high */
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG 10
-#define MV88E1116_CPRSP_CR3_REG 21
-#define MV88E1116_MAC_CTRL_REG 21
-#define MV88E1116_PGADR_REG 22
-#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
-
-/*
- * Commands configuration
- */
-#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
-#define CONFIG_CONSOLE_MUX
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define GOFLEXHOME_OE_VAL_LOW BIT(29) /* USB_PWEN low */
+#define GOFLEXHOME_OE_VAL_HIGH BIT(17) /* LED pin high */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_EXT4
-#define CONFIG_SYS_MVFS /* Picks up Filesystem from mv-common.h */
-
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
#include "mv-common.h"
-#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
-#define CONFIG_SYS_PROMPT "GoFlexHome> " /* Command Prompt */
-
-/*
- * Environment variables configurations
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_IS_IN_NAND 1
-#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
-#else
-#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
-#endif
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-#define CONFIG_ENV_SIZE 0x20000 /* 128k */
-#define CONFIG_ENV_ADDR 0xC0000
-#define CONFIG_ENV_OFFSET 0xC0000 /* env starts here */
-
/*
* Default environment variables
*/
-#define CONFIG_BOOTCOMMAND \
- "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
- "ubi part root; " \
- "ubifsmount ubi:root; " \
- "ubifsload 0x800000 ${kernel}; " \
- "bootm 0x800000"
-
-#define CONFIG_MTDPARTS \
- "mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=console=ttyS0,115200\0" \
"mtdids=nand0=orion_nand\0" \
- "mtdparts="CONFIG_MTDPARTS \
+ "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
"kernel=/boot/uImage\0" \
"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
/*
* Ethernet Driver configuration
*/
-#ifdef CONFIG_CMD_NET
#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
#define CONFIG_PHY_BASE_ADR 0
-#endif /* CONFIG_CMD_NET */
-/*
- * * SATA Driver configuration
- * */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
-/*
- * * RTC driver configuration
- * */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_MV
-#endif /* CONFIG_CMD_DATE */
+/* SATA driver configuration */
+#define CONFIG_LBA48
#endif /* _CONFIG_GOFLEXHOME_H */
projects / platform / kernel / u-boot.git / blobdiff