Rename CONFIG_EHCI_IS_TDI to CONFIG_USB_EHCI_IS_TDI

[platform/kernel/u-boot.git] / include / configs / ge_bx50v3.h

diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index 2d854af..0eeffd4 100644 (file)
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -19,12 +19,6 @@
 #include "mx6_common.h"
 #include <linux/sizes.h>
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)
-
 /* SATA Configs */
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE     1
@@ -33,21 +27,6 @@
 #define CONFIG_LBA48
 #endif
 
-/* USB Configs */
-#ifdef CONFIG_USB
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC  (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS   0
-
-#define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#endif
-
-/* Serial Flash */
-
-#define CONFIG_LOADADDR        0x12000000
-
 #ifdef CONFIG_CMD_NFS
 #define NETWORKBOOT \
         "setnetworkboot=" \
@@ -64,7 +43,7 @@
                 "nfs ${loadaddr} /srv/nfs/fitImage; " \
                 "bootm ${loadaddr}\0" \
 
-#define CONFIG_NETWORKBOOTCOMMAND \
+#define NETWORKBOOTCOMMAND \
        "run networkboot; " \
 
 #else
@@ -92,12 +71,12 @@
        "swappartitions=" \
                "setexpr partnum 3 - ${partnum}\0" \
        "failbootcmd=" \
-               "echo reached failbootcmd; " \
                "cls; " \
                "setcurs 5 4; " \
                "lcdputs \"Monitor failed to start. " \
                "Try again, or contact GE Service for support.\"; " \
-               "bootcount reset; \0" \
+               "bootcount reset; " \
+               "while true; do sleep 1; done; \0" \
        "altbootcmd=" \
                "run doquiet; " \
                "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
@@ -115,32 +94,20 @@
        "tryboot=" \
                "setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
                "run loadimage || run swappartitions && run loadimage || " \
-               "setenv partnum 0 && echo MISSING IMAGE;" \
+                       "setenv partnum 0 && echo MISSING IMAGE;" \
                "run doboot; " \
                "run failbootcmd\0" \
 
-#define CONFIG_MMCBOOTCOMMAND \
-       "if mmc dev ${devnum}; then " \
-               "run doquiet; " \
-               "run tryboot; " \
-       "fi; " \
-
-#define CONFIG_USBBOOTCOMMAND \
-       "echo Unsupported; " \
+#define MMCBOOTCOMMAND \
+       "run doquiet; " \
+       "run tryboot; " \
 
 #ifdef CONFIG_CMD_NFS
-#define CONFIG_BOOTCOMMAND CONFIG_NETWORKBOOTCOMMAND
-#elif CONFIG_CMD_USB
-#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
+#define CONFIG_BOOTCOMMAND NETWORKBOOTCOMMAND
 #else
-#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
+#define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND
 #endif
 
-
-/* Miscellaneous configurable options */
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
@@ -168,7 +135,6 @@
 
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
-#define CONFIG_PCIE_IMX_PERST_GPIO     IMX_GPIO_NR(7, 12)
 #define CONFIG_PCIE_IMX_POWER_GPIO     IMX_GPIO_NR(1, 5)
 
 #endif /* __GE_BX50V3_CONFIG_H */