Merge git://www.denx.de/git/u-boot

[platform/kernel/u-boot.git] / include / configs / gcplus.h

diff --git a/include/configs/gcplus.h b/include/configs/gcplus.h
index eefb8a6..e11ce4c 100644 (file)
--- a/include/configs/gcplus.h
+++ b/include/configs/gcplus.h
@@ -38,9 +38,10 @@
  * e.g. bootp/tftp download of the kernel is a far more convenient
  * when testing new kernels on this target. However the ADS GCPlus Linux
  * boot ROM leaves the MMU enabled when it passes control to U-Boot. So
- * we use memsetup (CONFIG_INIT_CRITICAL) to remedy that problem.
+ * we use lowlevel_init (CONFIG_INIT_CRITICAL) to remedy that problem.
  */
-#define CONFIG_INIT_CRITICAL
+#undef  CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SKIP_RELOCATE_UBOOT     1
 
 /*
  * High Level Configuration Options
@@ -78,18 +79,30 @@
 
 #define CONFIG_BAUDRATE                38400
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | CFG_CMD_DHCP)
-#define CONFIG_BOOTP_MASK      CONFIG_BOOTP_DEFAULT
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_SUBNETMASK
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_BOOTPATH
+
 
 #define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTARGS                "console=ttySA0,38400n8 mtdparts=sa1100-flash:1m@0(zImage),3m@1m(ramdisk.gz),12m@4m(userfs) root=/dev/nfs ip=bootp"
 #define CONFIG_BOOTCOMMAND     "bootp;tftp;bootm"
 #define CFG_AUTOLOAD            "n"             /* No autoload */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   38400           /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif
@@ -156,14 +169,14 @@
 #define CFG_FLASH_ERASE_TOUT   (2*CFG_HZ) /* Timeout for Flash Erase */
 #define CFG_FLASH_WRITE_TOUT   (2*CFG_HZ) /* Timeout for Flash Write */
 #else
-/* REVISIT: This doesn't work on ADS GCPlus just yet:
+/* REVISIT: This doesn't work on ADS GCPlus just yet: */
 #define CFG_FLASH_CFI           1       /* flash is CFI conformant      */
 #define CFG_FLASH_CFI_DRIVER    1       /* use common cfi driver        */
 #define CFG_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster) */
 #define CFG_MAX_FLASH_BANKS     1       /* max # of memory banks        */
 #define CFG_FLASH_INCREMENT     0       /* there is only one bank       */
 #define CFG_MAX_FLASH_SECT      128     /* max # of sectors on one chip */
-//#define CFG_FLASH_PROTECTION    1       /* hardware flash protection    */
+/*#define CFG_FLASH_PROTECTION    1       /--* hardware flash protection    */
 #define CFG_FLASH_BANKS_LIST    { CFG_FLASH_BASE }
 #endif