Convert CONFIG_HOSTNAME et al to Kconfig

[platform/kernel/u-boot.git] / include / configs / gazerbeam.h

diff --git a/include/configs/gazerbeam.h b/include/configs/gazerbeam.h
index 12d108d..671b75e 100644 (file)
--- a/include/configs/gazerbeam.h
+++ b/include/configs/gazerbeam.h
@@ -12,9 +12,9 @@
 /*
  * DDR Setup
  */
-#define CONFIG_SYS_SDRAM_BASE          0x00000000 /* DDR is system memory */
-/* TODO: Check: Can this be unified with CONFIG_SYS_SDRAM_BASE? */
-#define CONFIG_SYS_DDR_SDRAM_BASE      CONFIG_SYS_SDRAM_BASE
+#define CFG_SYS_SDRAM_BASE             0x00000000 /* DDR is system memory */
+/* TODO: Check: Can this be unified with CFG_SYS_SDRAM_BASE? */
+#define CFG_SYS_DDR_SDRAM_BASE CFG_SYS_SDRAM_BASE
 
 /*
  * Memory test
@@ -24,69 +24,37 @@
 /*
  * The reserved memory
  */
-#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE /* start of monitor */
-
-#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
 
 /*
  * Initial RAM Base Address Setup
  */
-#define CONFIG_SYS_INIT_RAM_LOCK
-#define CONFIG_SYS_INIT_RAM_ADDR       0xE6000000 /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_SIZE       0x1000 /* Size of used area in RAM */
-#define CONFIG_SYS_GBL_DATA_OFFSET     \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CFG_SYS_INIT_RAM_ADDR  0xE6000000 /* Initial RAM address */
+#define CFG_SYS_INIT_RAM_SIZE  0x1000 /* Size of used area in RAM */
 
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_BASE          0xFE000000 /* FLASH base address */
-#define CONFIG_SYS_FLASH_SIZE          8 /* FLASH size is up to 8M */
-
-#define CONFIG_SYS_MAX_FLASH_BANKS     1 /* number of banks */
-#define CONFIG_SYS_MAX_FLASH_SECT      135
+#define CFG_SYS_FLASH_BASE             0xFE000000 /* FLASH base address */
+#define CFG_SYS_FLASH_SIZE             8 /* FLASH size is up to 8M */
 
-#define CONFIG_SYS_BAUDRATE_TABLE  \
+#define CFG_SYS_BAUDRATE_TABLE  \
        {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*
- * Environment
- */
-
-#define CONFIG_LOADS_ECHO              /* echo on for serial download */
-#define CONFIG_SYS_LOADS_BAUD_CHANGE   /* allow baudrate change */
-
-/*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_HZ          1000    /* decrementer freq: 1ms ticks */
-
-#define CONFIG_SYS_CBSIZE      1024 /* Console I/O Buffer Size */
-
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
 
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ   (256 << 20) /* Initial Memory map for Linux */
+#define CFG_SYS_BOOTMAPSZ      (256 << 20) /* Initial Memory map for Linux */
 
 /*
  * Environment Configuration
  */
 
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-
-/* TODO: Turn into string option and migrate to Kconfig */
-#define CONFIG_HOSTNAME                "gazerbeam"
-#define CONFIG_ROOTPATH                "/opt/nfsroot"
-#define CONFIG_BOOTFILE                "uImage"
-
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "netdev=eth0\0"                                                 \
        "consoledev=ttyS1\0"                                            \
@@ -101,22 +69,4 @@
                __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0"   \
        "upd=run load update\0"                                         \
 
-#define NFSBOOTCOMMAND                                         \
-       "setenv bootargs root=/dev/nfs rw "                             \
-       "nfsroot=$serverip:$rootpath "                                  \
-       "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-       "console=$consoledev,$baudrate $othbootargs;"                   \
-       "tftp ${kernel_addr} $bootfile;"                                \
-       "tftp ${fdt_addr} $fdtfile;"                                    \
-       "bootm ${kernel_addr} - ${fdt_addr}"
-
-#define MMCBOOTCOMMAND                                         \
-       "setenv bootargs root=/dev/mmcblk0p3 rw rootwait "              \
-       "console=$consoledev,$baudrate $othbootargs;"                   \
-       "ext2load mmc 0:2 ${kernel_addr} $bootfile;"                    \
-       "ext2load mmc 0:2 ${fdt_addr} $fdtfile;"                        \
-       "bootm ${kernel_addr} - ${fdt_addr}"
-
-#define CONFIG_BOOTCOMMAND             MMCBOOTCOMMAND
-
 #endif /* __CONFIG_H */