Convert CONFIG_SYS_SPL_MALLOC_SIZE et al to Kconfig
[platform/kernel/u-boot.git] / include / configs / gardena-smart-gateway-at91sam.h
index e9a06e6..c6a84a7 100644 (file)
@@ -9,27 +9,18 @@
 #ifndef __CONFIG_H__
 #define __CONFIG_H__
 
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768
 #define CONFIG_SYS_AT91_MAIN_CLOCK     12000000        /* 12 MHz crystal */
 
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
-
-/* general purpose I/O */
-#define CONFIG_ATMEL_LEGACY            /* required until (g)pio is fixed */
-
 /* SDRAM */
 #define CONFIG_SYS_SDRAM_BASE          0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          0x08000000      /* 128 megs */
 
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_MALLOC_LEN          (16 * 1024 * 1024)
-
 /* NAND flash */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_ENABLE_PIN     AT91_PIN_PD4
 #define CONFIG_SYS_NAND_READY_PIN      AT91_PIN_PD5
 
-#define CONFIG_SYS_LOAD_ADDR           0x22000000      /* load address */
-
-/* environment organization */
-#define CONFIG_ENV_UBI_PART            "ubi"
-#define CONFIG_ENV_UBI_VOLUME          "env"
-#define CONFIG_ENV_UBI_VOLUME_REDUND   "env_r"
-#define CONFIG_ENV_SIZE                        (64 << 10)
-
 /* SPL */
-#define CONFIG_SPL_TEXT_BASE           0x300000
-#define CONFIG_SPL_MAX_SIZE            0x7000
-#define CONFIG_SPL_STACK               0x308000
-
-#define CONFIG_SPL_BSS_START_ADDR      0x20000000
-#define CONFIG_SPL_BSS_MAX_SIZE                0x80000
-#define CONFIG_SYS_SPL_MALLOC_START    0x20080000
-#define CONFIG_SYS_SPL_MALLOC_SIZE     0x80000
 
 #define CONFIG_SYS_MONITOR_LEN         (512 << 10)
 
 #define CONFIG_SYS_MCKR                        0x1301
 #define CONFIG_SYS_MCKR_CSS            0x1302
 
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SYS_NAND_U_BOOT_OFFS    0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE    0xa0000
-#define        CONFIG_SYS_UBOOT_START          CONFIG_SYS_TEXT_BASE
 #define        CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_NAND_U_BOOT_DST     CONFIG_SYS_TEXT_BASE
 
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_SIZE      0x800
-#define CONFIG_SYS_NAND_PAGE_COUNT     64
-#define CONFIG_SYS_NAND_OOBSIZE                64
-#define CONFIG_SYS_NAND_BLOCK_SIZE     0x20000
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS  0x0
-
-#define CONFIG_SPL_PAD_TO              CONFIG_SYS_NAND_U_BOOT_OFFS
 #define CONFIG_SYS_SPL_LEN             CONFIG_SPL_PAD_TO
 
 #endif