arm: Disable ATAGs support

[platform/kernel/u-boot.git] / include / configs / flea3.h

diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index 6ca69fb..daf90bd 100644 (file)
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
  *
@@ -6,8 +7,6 @@
  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
  *
  * Configuration for the flea3 board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,53 +17,28 @@
  /* High Level Configuration Options */
 #define CONFIG_MX35
 
-#define CONFIG_SYS_DCACHE_OFF
-
 #define CONFIG_MACH_TYPE               MACH_TYPE_FLEA3
 
 /* Set TEXT at the beginning of the NOR flash */
 
 /* This is required to setup the ESDC controller */
 
-#define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs */
-#define CONFIG_REVISION_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 1024 * 1024)
-
 /*
  * Hardware drivers
  */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM         2 /* I2C3 */
-#define CONFIG_SYS_MXC_I2C3_SLAVE      0xfe
 
 /*
  * UART (console)
  */
-#define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE   UART3_BASE
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
 /*
  * Command definition
  */
 
 #define CONFIG_NET_RETRY_COUNT 100
 
-
-#define CONFIG_LOADADDR                0x80800000      /* loadaddr env var */
-
 /*
  * Ethernet on SOC (FEC)
  */
@@ -72,8 +46,6 @@
 #define IMX_FEC_BASE   FEC_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR 0x1
 
-#define CONFIG_MII
-
 #define CONFIG_ARP_TIMEOUT     200UL
 
 /*
@@ -84,15 +56,9 @@
 /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS     32      /* max number of command args */
 
-#define CONFIG_SYS_MEMTEST_START       0       /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END         0x10000
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS   1
 #define PHYS_SDRAM_1           CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE      (128 * 1024 * 1024)
 
@@ -107,9 +73,6 @@
 /*
  * MTD Command for mtdparts
  */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_PARTITIONS
 
 /*
  * FLASH and environment organization
@@ -121,25 +84,13 @@
 #define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN         (512 * 1024)
 
-#define CONFIG_ENV_SECT_SIZE   (64 * 1024)
-#define CONFIG_ENV_SIZE                CONFIG_ENV_SECT_SIZE
-
 /* Address and size of Redundant Environment Sector    */
-#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_ADDR                (CONFIG_SYS_MONITOR_BASE + \
-                               CONFIG_SYS_MONITOR_LEN)
 
 /*
  * CFI FLASH driver setup
  */
-#define CONFIG_SYS_FLASH_CFI           /* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER
 
 /* A non-standard buffered write algorithm */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE      /* faster */
-#define CONFIG_SYS_FLASH_PROTECTION    /* Use hardware sector protection */
 
 /*
  * NAND FLASH driver setup