Merge tag 'next-20220328' of https://source.denx.de/u-boot/custodians/u-boot-video...

[platform/kernel/u-boot.git] / include / configs / exynos5-common.h

diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 5411e5f..410243b 100644 (file)
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013 Samsung Electronics
  *
  * Configuration settings for the SAMSUNG EXYNOS5 board.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_EXYNOS5_COMMON_H
@@ -15,18 +14,8 @@
 
 #define CONFIG_EXYNOS_SPL
 
-#ifdef FTRACE
-#define CONFIG_TRACE
-#define CONFIG_CMD_TRACE
-#define CONFIG_TRACE_BUFFER_SIZE       (16 << 20)
-#define CONFIG_TRACE_EARLY_SIZE                (8 << 20)
-#define CONFIG_TRACE_EARLY
-#define CONFIG_TRACE_EARLY_ADDR                0x50000000
-#endif
-
 /* Enable ACE acceleration for SHA1 and SHA256 */
 #define CONFIG_EXYNOS_ACE_SHA
-#define CONFIG_SHA_HW_ACCEL
 
 /* Power Down Modes */
 #define S5P_CHECK_SLEEP                        0x00000BAD
@@ -42,25 +31,11 @@
 /* select serial console configuration */
 #define EXYNOS5_DEFAULT_UART_OFFSET    0x010000
 
-#define CONFIG_CMD_HASH
-
 /* Thermal Management Unit */
 #define CONFIG_EXYNOS_TMU
-#define CONFIG_CMD_DTT
-#define CONFIG_TMU_CMD_DTT
 
 /* MMC SPL */
 #define COPY_BL2_FNPTR_ADDR    0x02020030
-#define CONFIG_SUPPORT_EMMC_BOOT
-
-/* specific .lds file */
-#define CONFIG_SPL_LDSCRIPT    "board/samsung/common/exynos-uboot-spl.lds"
-
-/* Boot Argument Buffer Size */
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
-#define CONFIG_SYS_LOAD_ADDR           (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
 
 #define CONFIG_RD_LVL
 
@@ -83,75 +58,16 @@
 
 #define CONFIG_SYS_MONITOR_BASE        0x00000000
 
-#define CONFIG_SYS_MMC_ENV_DEV         0
-
-#define CONFIG_SECURE_BL1_ONLY
-
-/* Secure FW size configuration */
-#ifdef CONFIG_SECURE_BL1_ONLY
-#define CONFIG_SEC_FW_SIZE (8 << 10) /* 8KB */
-#else
-#define CONFIG_SEC_FW_SIZE 0
-#endif
-
-/* Configuration of BL1, BL2, ENV Blocks on mmc */
-#define CONFIG_RES_BLOCK_SIZE  (512)
-#define CONFIG_BL1_SIZE        (16 << 10) /*16 K reserved for BL1*/
-#define CONFIG_BL2_SIZE        (512UL << 10UL) /* 512 KB */
-#define CONFIG_ENV_SIZE        (16 << 10) /* 16 KB */
-
-#define CONFIG_BL1_OFFSET      (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
-#define CONFIG_BL2_OFFSET      (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
-
-/* U-Boot copy size from boot Media to DRAM.*/
-#define BL2_START_OFFSET       (CONFIG_BL2_OFFSET/512)
-#define BL2_SIZE_BLOC_COUNT    (CONFIG_BL2_SIZE/512)
-
-#define EXYNOS_COPY_SPI_FNPTR_ADDR     0x02020058
-#define SPI_FLASH_UBOOT_POS    (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
-
-/* I2C */
-#define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_SYS_I2C_S3C24X0_SPEED   100000          /* 100 Kbps */
-#define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
-
 /* SPI */
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
-#define CONFIG_SF_DEFAULT_SPEED                50000000
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MODE    SPI_MODE_0
-#define CONFIG_ENV_SECT_SIZE   CONFIG_ENV_SIZE
-#define CONFIG_ENV_SPI_BUS     1
-#define CONFIG_ENV_SPI_MAX_HZ  50000000
-#endif
 
 /* Ethernet Controllor Driver */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE            0x5000000
-#define CONFIG_SMC911X_16_BIT
 #define CONFIG_ENV_SROM_BANK           1
 #endif /*CONFIG_CMD_NET*/
 
-/* SHA hashing */
-#define CONFIG_CMD_HASH
-#define CONFIG_HASH_VERIFY
-#define CONFIG_SHA1
-#define CONFIG_SHA256
-
 /* Enable Time Command */
 
 /* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
-
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_RTL8152
 
 /* USB boot mode */
 #define CONFIG_USB_BOOTING
@@ -160,6 +76,7 @@
 #define EXYNOS_IRAM_SECONDARY_BASE     0x02020018
 
 #define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 2) \
        func(MMC, mmc, 1) \
        func(MMC, mmc, 0) \
        func(PXE, pxe, na) \