ARM: Move SYS_CACHELINE_SIZE over to Kconfig

[platform/kernel/u-boot.git] / include / configs / exynos5-common.h

diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index ba591e7..1538787 100644 (file)
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -13,17 +13,16 @@
 
 #include "exynos-common.h"
 
-#define CONFIG_SYS_CACHELINE_SIZE      64
 #define CONFIG_EXYNOS_SPL
 
-/* Allow tracing to be enabled */
+#ifdef FTRACE
 #define CONFIG_TRACE
 #define CONFIG_CMD_TRACE
 #define CONFIG_TRACE_BUFFER_SIZE       (16 << 20)
 #define CONFIG_TRACE_EARLY_SIZE                (8 << 20)
 #define CONFIG_TRACE_EARLY
 #define CONFIG_TRACE_EARLY_ADDR                0x50000000
-
+#endif
 
 /* Enable ACE acceleration for SHA1 and SHA256 */
 #define CONFIG_EXYNOS_ACE_SHA
@@ -47,17 +46,6 @@
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_CONSOLE_MUX
 
-#define EXYNOS_DEVICE_SETTINGS \
-               "stdin=serial\0" \
-               "stdout=serial\0" \
-               "stderr=serial\0"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       EXYNOS_DEVICE_SETTINGS
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_HASH
 
 /* Thermal Management Unit */
@@ -65,19 +53,13 @@
 #define CONFIG_CMD_DTT
 #define CONFIG_TMU_CMD_DTT
 
-/* TPM */
-#define CONFIG_TPM
-#define CONFIG_CMD_TPM
-#define CONFIG_TPM_TIS_I2C
-#define CONFIG_TPM_TIS_I2C_BUS_NUMBER  3
-#define CONFIG_TPM_TIS_I2C_SLAVE_ADDR  0x20
-
 /* MMC SPL */
 #define COPY_BL2_FNPTR_ADDR    0x02020030
 #define CONFIG_SUPPORT_EMMC_BOOT
 
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_GPIO_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
 
 /* specific .lds file */
 #define CONFIG_SPL_LDSCRIPT    "board/samsung/common/exynos-uboot-spl.lds"
@@ -129,7 +111,7 @@
 #define CONFIG_BL1_OFFSET      (CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
 #define CONFIG_BL2_OFFSET      (CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
 
-/* U-boot copy size from boot Media to DRAM.*/
+/* U-Boot copy size from boot Media to DRAM.*/
 #define BL2_START_OFFSET       (CONFIG_BL2_OFFSET/512)
 #define BL2_SIZE_BLOC_COUNT    (CONFIG_BL2_SIZE/512)
 
@@ -137,26 +119,14 @@
 #define SPI_FLASH_UBOOT_POS    (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
 
 /* I2C */
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_SYS_I2C
-#define CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C_S3C24X0_SPEED   100000          /* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C_S3C24X0_SPEED   100000          /* 100 Kbps */
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
-#define CONFIG_I2C_EDID
 
 /* SPI */
 #ifdef CONFIG_SPI_FLASH
-#define CONFIG_EXYNOS_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_SPI_FLASH_GIGADEVICE
 #define CONFIG_SF_DEFAULT_MODE         SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED                50000000
-#define EXYNOS5_SPI_NUM_CONTROLLERS    5
-#define CONFIG_OF_SPI
 #endif
 
 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
@@ -174,12 +144,6 @@
 #define CONFIG_ENV_SROM_BANK           1
 #endif /*CONFIG_CMD_NET*/
 
-/* Enable PXE Support */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-#endif
-
 /* SHA hashing */
 #define CONFIG_CMD_HASH
 #define CONFIG_HASH_VERIFY
@@ -187,11 +151,16 @@
 #define CONFIG_SHA256
 
 /* Enable Time Command */
-#define CONFIG_CMD_TIME
 
-#define CONFIG_CMD_BOOTZ
+/* USB */
+#define CONFIG_USB_STORAGE
+#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS     3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS     2
 
-#define CONFIG_CMD_GPIO
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_USB_ETHER_RTL8152
 
 /* USB boot mode */
 #define CONFIG_USB_BOOTING
@@ -199,8 +168,40 @@
 #define EXYNOS_USB_SECONDARY_BOOT      0xfeed0002
 #define EXYNOS_IRAM_SECONDARY_BASE     0x02020018
 
-/* Enable FIT support and comparison */
-#define CONFIG_FIT
-#define CONFIG_FIT_BEST_MATCH
+#define BOOT_TARGET_DEVICES(func) \
+       func(MMC, mmc, 1) \
+       func(MMC, mmc, 0) \
+       func(PXE, pxe, na) \
+       func(DHCP, dhcp, na)
+
+#include <config_distro_bootcmd.h>
+
+#ifndef MEM_LAYOUT_ENV_SETTINGS
+/* 2GB RAM, bootm size of 256M, load scripts after that */
+#define MEM_LAYOUT_ENV_SETTINGS \
+       "bootm_size=0x10000000\0" \
+       "kernel_addr_r=0x42000000\0" \
+       "fdt_addr_r=0x43000000\0" \
+       "ramdisk_addr_r=0x43300000\0" \
+       "scriptaddr=0x50000000\0" \
+       "pxefile_addr_r=0x51000000\0"
+#endif
+
+#ifndef EXYNOS_DEVICE_SETTINGS
+#define EXYNOS_DEVICE_SETTINGS \
+       "stdin=serial\0" \
+       "stdout=serial\0" \
+       "stderr=serial\0"
+#endif
+
+#ifndef EXYNOS_FDTFILE_SETTING
+#define EXYNOS_FDTFILE_SETTING
+#endif
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       EXYNOS_DEVICE_SETTINGS \
+       EXYNOS_FDTFILE_SETTING \
+       MEM_LAYOUT_ENV_SETTINGS \
+       BOOTENV
 
 #endif /* __CONFIG_EXYNOS5_COMMON_H */