global: Convert CONFIG_LOADADDR to CONFIG_SYS_LOADADDR

[platform/kernel/u-boot.git] / include / configs / ethernut5.h

diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index b83eb45..dc01de7 100644 (file)
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -1,10 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011
  * egnite GmbH <info@egnite.de>
  *
  * Configuation settings for Ethernut 5 with AT91SAM9XE.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -13,7 +12,6 @@
 #include <asm/hardware.h>
 
 /* The first stage boot loader expects u-boot running at this address. */
-#define CONFIG_SYS_TEXT_BASE   0x27000000      /* 16MB available */
 
 /* The first stage boot loader takes care of low level initialization. */
 #define CONFIG_SKIP_LOWLEVEL_INIT
@@ -22,7 +20,6 @@
 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
-#define CONFIG_ARCH_CPU_INIT
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK     32768   /* slow clock xtal */
@@ -35,73 +32,26 @@
                                GENERATED_GBL_DATA_SIZE)
 
 /* 128MB SDRAM in 1 bank */
-#define CONFIG_NR_DRAM_BANKS           1
 #define CONFIG_SYS_SDRAM_BASE          0x20000000
 #define CONFIG_SYS_SDRAM_SIZE          (128 << 20)
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_SYS_SDRAM_BASE
-#define CONFIG_LOADADDR                        CONFIG_SYS_LOAD_ADDR
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (1 << 20))
-#define CONFIG_SYS_MEMTEST_START       CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END         (CONFIG_SYS_TEXT_BASE \
-                                       - CONFIG_SYS_MALLOC_LEN)
 
 /* 512kB on-chip NOR flash */
 # define CONFIG_SYS_MAX_FLASH_BANKS    1
 # define CONFIG_SYS_FLASH_BASE         0x00200000 /* AT91SAM9XE_FLASH_BASE */
 # define CONFIG_AT91_EFLASH
 # define CONFIG_SYS_MAX_FLASH_SECT     32
-# define CONFIG_SYS_FLASH_PROTECTION   /* First stage loader in sector 0 */
 # define CONFIG_EFLASH_PROTSECTORS     1
 
-/* 512kB DataFlash at NPCS0 */
-#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
-#define CONFIG_HAS_DATAFLASH
-#define CONFIG_ATMEL_DATAFLASH_SPI
-#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0    0xC0000000
-#define DATAFLASH_TCSS                 (0x1a << 16)
-#define DATAFLASH_TCHS                 (0x1 << 24)
-
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_OFFSET              0x3DE000
-#define CONFIG_ENV_SECT_SIZE           (132 << 10)
-#define CONFIG_ENV_SIZE                        CONFIG_ENV_SECT_SIZE
-#define CONFIG_ENV_ADDR                        (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \
-                                       + CONFIG_ENV_OFFSET)
-#define CONFIG_SYS_MONITOR_BASE                (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \
-                                       + 0x042000)
-
-/* SPI */
-#define CONFIG_ATMEL_SPI
-#define AT91_SPI_CLK                   15000000
-
-/* Serial port */
-#define CONFIG_ATMEL_USART
-#define CONFIG_USART3                  /* USART 3 is DBGU */
-#define CONFIG_USART_BASE              ATMEL_BASE_DBGU
-#define        CONFIG_USART_ID                 ATMEL_ID_SYS
-
-/* Misc. hardware drivers */
-#define CONFIG_AT91_GPIO
-
-/* Command line configuration */
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
-
-#ifndef MINIMAL_LOADER
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_REISER
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_UBIFS
-#endif
+
+/* bootstrap + u-boot + env + linux in dataflash on CS0 */
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 #define CONFIG_SYS_NAND_BASE           0x40000000
 #define CONFIG_SYS_NAND_DBW_8
-#define CONFIG_NAND_ATMEL
 /* our ALE is AD21 */
 #define CONFIG_SYS_NAND_MASK_ALE       (1 << 21)
 /* our CLE is AD22 */
@@ -111,7 +61,6 @@
 
 /* JFFS2 */
 #ifdef CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_NAND
 #endif
 
@@ -141,18 +90,12 @@
 
 /* RTC */
 #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP)
-#define CONFIG_RTC_PCF8563
 #define CONFIG_SYS_I2C_RTC_ADDR                0x51
 #endif
 
 /* I2C */
 #define CONFIG_SYS_MAX_I2C_BUS 1
 
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT                    /* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED      100000
-#define CONFIG_SYS_I2C_SOFT_SLAVE      0
-
 #define I2C_SOFT_DECLARATIONS
 
 #define GPIO_I2C_SCL           AT91_PIO_PORTA, 24
@@ -176,40 +119,19 @@
 /* DHCP/BOOTP options */
 #ifdef CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 #define CONFIG_SYS_AUTOLOAD    "n"
 #endif
 
 /* File systems */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#if defined(CONFIG_CMD_MTDPARTS) || defined(CONFIG_CMD_NAND)
-#define MTDIDS_DEFAULT         "nand0=atmel_nand"
-#define MTDPARTS_DEFAULT       "mtdparts=atmel_nand:-(root)"
-#endif
-#define CONFIG_LZO
-#define CONFIG_RBTREE
 
 /* Boot command */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
-#define CONFIG_BOOTCOMMAND     "cp.b 0xC00C6000 ${loadaddr} 0x294000; bootm"
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_BOOTARGS                "console=ttyS0,115200 " \
-                               "root=/dev/mtdblock0 " \
-                               MTDPARTS_DEFAULT \
-                               " rw rootfstype=jffs2"
-#endif
+#define CONFIG_BOOTCOMMAND     "sf probe 0:0; " \
+                               "sf read 0x22000000 0xc6000 0x294000; " \
+                               "bootm 0x22000000"
 
 /* Misc. u-boot settings */
-#define CONFIG_SYS_CBSIZE              256
-#define CONFIG_SYS_MAXARGS             16
-#define CONFIG_SYS_PBSIZE              (CONFIG_SYS_CBSIZE + 16 \
-                                       + sizeof(CONFIG_SYS_PROMPT))
-#define CONFIG_SYS_LONGHELP
-#define CONFIG_CMDLINE_EDITING
 
 #endif