Merge branch 'next' of git://git.denx.de/u-boot-avr32

[platform/kernel/u-boot.git] / include / configs / ep8248.h

diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 44c4388..ccc0d5d 100644 (file)
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -31,8 +31,6 @@
 
 #define CONFIG_EP8248                  /* Embedded Planet EP8248 board */
 
-#undef DEBUG
-
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* Call board_early_init_f      */
 
 /* Allow serial number (serial#) and MAC address (ethaddr) to be overwritten */
@@ -60,8 +58,8 @@
  * SCC, 1-3 for FCC)
  *
  * If CONFIG_ETHER_NONE is defined, then either the ethernet routines
- * must be defined elsewhere (as for the console), or CFG_CMD_NET must
- * be removed from CONFIG_COMMANDS to remove support for networking.
+ * must be defined elsewhere (as for the console), or CONFIG_CMD_NET
+ * must be unset.
  */
 #undef CONFIG_ETHER_ON_SCC             /* Ethernet is not on SCC */
 #define CONFIG_ETHER_ON_FCC            /* Ethernet is on FCC     */
@@ -125,6 +123,15 @@
 
 
 /*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
+/*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
@@ -179,7 +186,7 @@
 
 #define CFG_FLASH_BASE         0xFF800000
 #define CFG_FLASH_CFI
-#define CFG_FLASH_CFI_DRIVER
+#define CONFIG_FLASH_CFI_DRIVER
 #define CFG_MAX_FLASH_BANKS    1       /* max num of flash banks       */
 #define CFG_MAX_FLASH_SECT     256     /* max num of sects on one chip */
 
@@ -192,13 +199,13 @@
 #define CFG_JFFS2_LAST_SECTOR   62
 #define CFG_JFFS2_SORT_FRAGMENTS
 #define CFG_JFFS_CUSTOM_PART
-#endif /* CFG_CMD_JFFS2 */
+#endif
 
 #if defined(CONFIG_CMD_I2C)
 #define CONFIG_HARD_I2C                1       /* To enable I2C support        */
 #define CFG_I2C_SPEED          100000  /* I2C speed                    */
 #define CFG_I2C_SLAVE          0x7F    /* I2C slave address            */
-#endif /* CFG_CMD_I2C */
+#endif
 
 #define CFG_MONITOR_BASE       TEXT_BASE
 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
@@ -227,13 +234,13 @@
 /* Hard reset configuration word */
 #define CFG_HRCW_MASTER                0x0C40025A /* Not used - provided by FPGA */
 /* No slaves */
-#define CFG_HRCW_SLAVE1        0
-#define CFG_HRCW_SLAVE2        0
-#define CFG_HRCW_SLAVE3        0
-#define CFG_HRCW_SLAVE4        0
-#define CFG_HRCW_SLAVE5        0
-#define CFG_HRCW_SLAVE6        0
-#define CFG_HRCW_SLAVE7        0
+#define CFG_HRCW_SLAVE1                0
+#define CFG_HRCW_SLAVE2                0
+#define CFG_HRCW_SLAVE3                0
+#define CFG_HRCW_SLAVE4                0
+#define CFG_HRCW_SLAVE5                0
+#define CFG_HRCW_SLAVE6                0
+#define CFG_HRCW_SLAVE7                0
 
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH */
 #define BOOTFLAG_WARM          0x02    /* Software reboot                  */