global: Migrate CONFIG_SYS_FSL* symbols to the CFG_SYS namespace

[platform/kernel/u-boot.git] / include / configs / el6x_common.h

diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h
index f7b96e4..affe20a 100644 (file)
--- a/include/configs/el6x_common.h
+++ b/include/configs/el6x_common.h
@@ -10,49 +10,26 @@
 
 #include <linux/stringify.h>
 
-#define CONFIG_BOARD_NAME              EL6Q
-
 #include "mx6_common.h"
 
-#define CONFIG_IMX_THERMAL
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN          (10 * SZ_1M)
-
-#define CONFIG_MXC_UART
-
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
 #endif
 
 /* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR      0
-#define CONFIG_SYS_FSL_USDHC_NUM       2
-
-/* I2C config */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1                /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2                /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3                /* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED                   100000
+#define CFG_SYS_FSL_ESDHC_ADDR 0
+#define CFG_SYS_FSL_USDHC_NUM  2
 
 /* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
 
 /* Commands */
 
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
 #define CONFIG_MXC_UART_BASE   UART2_BASE
 
-#define CONFIG_BOARD_NAME      EL6Q
-
 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
-       "board="__stringify(CONFIG_BOARD_NAME)"\0"                              \
+       "board=EL6Q\0"                                                          \
        "cma_size="__stringify(EL6Q_CMA_SIZE)"\0"                               \
        "chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0"                     \
        "console=" CONSOLE_DEV "\0"                                     \
@@ -61,9 +38,9 @@
        "fdt_addr_r=0x18000000\0" \
        "fdt_addr=0x18000000\0" \
        "findfdt=setenv fdtfile " CONFIG_DEFAULT_FDT_FILE "\0"                  \
-       "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-       "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
-       "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+       "kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+       "pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
        BOOTENV
 
 #define BOOT_TARGET_DEVICES(func) \
@@ -74,8 +51,6 @@
 
 #include <config_distro_bootcmd.h>
 
-#define CONFIG_ARP_TIMEOUT     200UL
-
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
@@ -83,16 +58,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-       (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-       (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 /* environment organization */
 
-#if defined(CONFIG_ENV_IS_IN_MMC)
-#define CONFIG_SYS_MMC_ENV_DEV         1
-#define CONFIG_SYS_MMC_ENV_PART                2
-#endif
-
 #endif                         /* __EL6Q_COMMON_CONFIG_H */