ARM: Remove unused stack and irq config defines

[platform/kernel/u-boot.git] / include / configs / efikamx.h

diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index ce96b78..439b5f3 100644 (file)
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -44,6 +44,10 @@
 
 #define CONFIG_SYS_TEXT_BASE           0x97800000
 
+#define        CONFIG_L2_OFF
+#define        CONFIG_SYS_ICACHE_OFF
+#define        CONFIG_SYS_DCACHE_OFF
+
 /*
  * Bootloader Components Configuration
  */
@@ -53,6 +57,8 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DATE
 #undef CONFIG_CMD_IMLS
 
 /*
@@ -85,10 +91,9 @@
  * Hardware drivers
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_UART_BASE           UART1_BASE
 #define CONFIG_CONS_INDEX              1
 #define CONFIG_BAUDRATE                        115200
-#define CONFIG_SYS_BAUDRATE_TABLE      {9600, 19200, 38400, 57600, 115200}
 
 #define CONFIG_MXC_GPIO
 
@@ -107,7 +112,7 @@
 
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_CS            (1 | 121 << 8)
+#define CONFIG_SF_DEFAULT_CS           (1 | 121 << 8)
 #define CONFIG_SF_DEFAULT_MODE         (SPI_MODE_0)
 #define CONFIG_SF_DEFAULT_SPEED                25000000
 
@@ -124,12 +129,15 @@
 #endif
 
 /* SPI PMIC */
-#define CONFIG_FSL_PMIC
+#define CONFIG_PMIC
+#define CONFIG_PMIC_SPI
+#define CONFIG_PMIC_FSL
 #define CONFIG_FSL_PMIC_BUS            0
 #define CONFIG_FSL_PMIC_CS             (0 | 120 << 8)
 #define CONFIG_FSL_PMIC_CLK            25000000
 #define CONFIG_FSL_PMIC_MODE           (SPI_MODE_0 | SPI_CS_HIGH)
-#define CONFIG_RTC_MC13783
+#define CONFIG_FSL_PMIC_BITLEN 32
+#define CONFIG_RTC_MC13XXX
 #endif
 
 /*
@@ -172,17 +180,45 @@
 #endif
 
 /*
+ * USB
+ */
+#define        CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define        CONFIG_USB_EHCI                 /* Enable EHCI USB support */
+#define        CONFIG_USB_EHCI_MX5
+#define        CONFIG_USB_ULPI
+#define        CONFIG_USB_ULPI_VIEWPORT
+#define        CONFIG_MXC_USB_PORT     1
+#if    (CONFIG_MXC_USB_PORT == 0)
+#define        CONFIG_MXC_USB_PORTSC   (1 << 28)
+#define        CONFIG_MXC_USB_FLAGS    MXC_EHCI_INTERNAL_PHY
+#else
+#define        CONFIG_MXC_USB_PORTSC   (2 << 30)
+#define        CONFIG_MXC_USB_FLAGS    0
+#endif
+#define        CONFIG_EHCI_IS_TDI
+#define        CONFIG_USB_STORAGE
+#define        CONFIG_USB_HOST_ETHER
+#define        CONFIG_USB_KEYBOARD
+#define        CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+#define CONFIG_PREBOOT
+/* USB NET */
+#ifdef CONFIG_CMD_NET
+#define        CONFIG_USB_ETHER_ASIX
+#define        CONFIG_CMD_PING
+#define        CONFIG_CMD_DHCP
+#endif
+#endif /* CONFIG_CMD_USB */
+
+/*
  * Filesystems
  */
 #ifdef CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
+#ifdef CONFIG_CMD_NET
+#define        CONFIG_CMD_NFS
+#endif
 #endif
-
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#define CONFIG_CMD_DATE
 
 /*
  * Miscellaneous configurable options
@@ -193,7 +229,6 @@
 
 #define CONFIG_SYS_LONGHELP            /* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER         /* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 #define CONFIG_SYS_PROMPT              "Efika> "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256     /* Console I/O Buffer Size */
@@ -203,7 +238,7 @@
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START       0x90000000
-#define CONFIG_SYS_MEMTEST_END         0x10000
+#define CONFIG_SYS_MEMTEST_END         0x90010000
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 
@@ -211,13 +246,6 @@
 #define CONFIG_CMDLINE_EDITING
 
 /*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE       (128 * 1024)    /* regular stack */
-
-/*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS           1