configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / include / configs / edminiv2.h

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index b262b37..90e387e 100644 (file)
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
  *
@@ -5,8 +6,6 @@
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _CONFIG_EDMINIV2_H
@@ -16,7 +15,6 @@
  * SPL
  */
 
-#define CONFIG_SPL_TEXT_BASE           0xffff0000
 #define CONFIG_SPL_MAX_SIZE            0x0000fff0
 #define CONFIG_SPL_STACK               0x00020000
 #define CONFIG_SPL_BSS_START_ADDR      0x00020000
@@ -30,10 +28,6 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_MARVELL         1
-#define CONFIG_FEROCEON                1       /* CPU Core subversion */
-#define CONFIG_88F5182         1       /* SOC Name */
-
 #include <asm/arch/orion5x.h>
 /*
  * CLKs configurations
@@ -84,7 +78,6 @@
  * for your console driver.
  */
 
-#define CONFIG_CONS_INDEX      1       /*Console on UART0 */
 #define CONFIG_SYS_BAUDRATE_TABLE \
        { 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
 
@@ -92,42 +85,23 @@
  * FLASH configuration
  */
 
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_MAX_FLASH_BANKS     1  /* max num of flash banks       */
 #define CONFIG_SYS_MAX_FLASH_SECT      11 /* max num of sects on one chip */
 #define CONFIG_SYS_FLASH_BASE          0xfff80000
 
 /* auto boot */
 
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG      1       /* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1     /* enable memory tag */
-
 #define        CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
-/*
- * Commands configuration
- */
 
 /*
  * Network
  */
 
 #ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE                           /* Enable Marvell GbE Driver */
 #define CONFIG_MVGBE_PORTS     {1}             /* enable port 0 only */
 #define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION    /* don't randomize MAC */
 #define CONFIG_PHY_BASE_ADR    0x8
 #define CONFIG_RESET_PHY_R     /* use reset_phy() to init mv8831116 PHY */
-#define CONFIG_NETCONSOLE      /* include NetConsole support   */
-#define        CONFIG_MII              /* expose smi ove miiphy interface */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        /* detect link using phy */
-#define CONFIG_ENV_OVERWRITE   /* ethaddr can be reprogrammed */
 #endif
 
 /*
@@ -135,11 +109,6 @@
  */
 #ifdef CONFIG_IDE
 #define __io
-#define CONFIG_IDE_PREINIT
-/* ED Mini V has an IDE-compatible SATA connector for port 1 */
-#define CONFIG_MVSATA_IDE_USE_PORT1
-/* Needs byte-swapping for ATA data register */
-#define CONFIG_IDE_SWAP_IO
 /* Data, registers and alternate blocks are at the same offset */
 #define CONFIG_SYS_ATA_DATA_OFFSET     (0x0100)
 #define CONFIG_SYS_ATA_REG_OFFSET      (0x0100)
@@ -169,35 +138,12 @@
  * I2C related stuff
  */
 #ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_I2C_MVTWSI_BASE0                ORION5X_TWSI_BASE
-#define CONFIG_SYS_I2C_SLAVE           0x0
-#define CONFIG_SYS_I2C_SPEED           100000
 #endif
 
 /*
  *  Environment variables configurations
  */
-#define CONFIG_ENV_SECT_SIZE           0x2000  /* 16K */
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_OFFSET              0x4000  /* env starts here */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  (1024 * 256) /* 256kB for malloc() */
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_ARCH_CPU_INIT           /* call arch_cpu_init() */
-#define CONFIG_NR_DRAM_BANKS           1
-
-#define CONFIG_SYS_LOAD_ADDR           0x00800000
-#define CONFIG_SYS_MEMTEST_START       0x00400000
-#define CONFIG_SYS_MEMTEST_END         0x007fffff
-#define CONFIG_SYS_RESET_ADDRESS       0xffff0000
 
 /* Enable command line editing */