configs: Migrate CONFIG_SYS_MAX_FLASH_BANKS to Kconfig

[platform/kernel/u-boot.git] / include / configs / edminiv2.h

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 645fc3f..90e387e 100644 (file)
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -15,7 +15,6 @@
  * SPL
  */
 
-#define CONFIG_SPL_TEXT_BASE           0xffff0000
 #define CONFIG_SPL_MAX_SIZE            0x0000fff0
 #define CONFIG_SPL_STACK               0x00020000
 #define CONFIG_SPL_BSS_START_ADDR      0x00020000
@@ -29,9 +28,6 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_FEROCEON                1       /* CPU Core subversion */
-#define CONFIG_88F5182         1       /* SOC Name */
-
 #include <asm/arch/orion5x.h>
 /*
  * CLKs configurations
@@ -89,25 +85,12 @@
  * FLASH configuration
  */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS     1  /* max num of flash banks       */
 #define CONFIG_SYS_MAX_FLASH_SECT      11 /* max num of sects on one chip */
 #define CONFIG_SYS_FLASH_BASE          0xfff80000
 
 /* auto boot */
 
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG     1       /* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG      1       /* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1     /* enable memory tag */
-
 #define        CONFIG_SYS_CBSIZE       1024    /* Console I/O Buff Size */
-/*
- * Commands configuration
- */
 
 /*
  * Network
@@ -118,9 +101,7 @@
 #define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION    /* don't randomize MAC */
 #define CONFIG_PHY_BASE_ADR    0x8
 #define CONFIG_RESET_PHY_R     /* use reset_phy() to init mv8831116 PHY */
-#define CONFIG_NETCONSOLE      /* include NetConsole support   */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        /* detect link using phy */
-#define CONFIG_ENV_OVERWRITE   /* ethaddr can be reprogrammed */
 #endif
 
 /*
@@ -128,11 +109,6 @@
  */
 #ifdef CONFIG_IDE
 #define __io
-#define CONFIG_IDE_PREINIT
-/* ED Mini V has an IDE-compatible SATA connector for port 1 */
-#define CONFIG_MVSATA_IDE_USE_PORT1
-/* Needs byte-swapping for ATA data register */
-#define CONFIG_IDE_SWAP_IO
 /* Data, registers and alternate blocks are at the same offset */
 #define CONFIG_SYS_ATA_DATA_OFFSET     (0x0100)
 #define CONFIG_SYS_ATA_REG_OFFSET      (0x0100)
@@ -162,34 +138,12 @@
  * I2C related stuff
  */
 #ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_I2C_MVTWSI_BASE0                ORION5X_TWSI_BASE
-#define CONFIG_SYS_I2C_SLAVE           0x0
-#define CONFIG_SYS_I2C_SPEED           100000
 #endif
 
 /*
  *  Environment variables configurations
  */
-#define CONFIG_ENV_SECT_SIZE           0x2000  /* 16K */
-#define CONFIG_ENV_SIZE                        0x2000
-#define CONFIG_ENV_OFFSET              0x4000  /* env starts here */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN  (1024 * 256) /* 256kB for malloc() */
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_ARCH_CPU_INIT           /* call arch_cpu_init() */
-
-#define CONFIG_SYS_LOAD_ADDR           0x00800000
-#define CONFIG_SYS_MEMTEST_START       0x00400000
-#define CONFIG_SYS_MEMTEST_END         0x007fffff
-#define CONFIG_SYS_RESET_ADDRESS       0xffff0000
 
 /* Enable command line editing */