+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
*
* (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_EB_CPU5282_H_
* High Level Configuration Options (easy to change) *
*----------------------------------------------------------------------*/
-#define CONFIG_MCF52x2 /* define processor family */
-#define CONFIG_M5282 /* define processor type */
-
#define CONFIG_MISC_INIT_R
#define CONFIG_MCFUART
#define CONFIG_SYS_UART_PORT (0)
-#define CONFIG_BAUDRATE 115200
#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
#define CONFIG_HW_WATCHDOG
-#define CONFIG_STATUS_LED
-#define CONFIG_BOARD_SPECIFIC_LED
#define STATUS_LED_ACTIVE 0
-#define STATUS_LED_BIT 0x0008 /* Timer7 GPIO */
-#define STATUS_LED_BOOT 0
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
-#define STATUS_LED_STATE STATUS_LED_OFF
/*----------------------------------------------------------------------*
* Configuration for environment *
#define CONFIG_ENV_ADDR 0xFF040000
#define CONFIG_ENV_SECT_SIZE 0x00020000
-#define CONFIG_ENV_IS_IN_FLASH 1
/*
* BOOTP options
*/
#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
/*
* Command line configuration.
*/
-#define CONFIG_CMDLINE_EDITING
-#include <config_cmd_default.h>
-
-#undef CONFIG_CMD_LOADB
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_LED
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
#define CONFIG_MCFTMR
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_SYS_PROMPT "\nEB+CPU5282> "
-#define CONFIG_SYS_LONGHELP 1
-
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR 0x20000
/*----------------------------------------------------------------------*
* Clock and PLL Configuration *
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */
/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0
#define CONFIG_SYS_MONITOR_LEN 0x20000
-#define CONFIG_SYS_MALLOC_LEN (256 << 10)
+#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
/*
* I2C
*/
-#define CONFIG_HARD_I2C
-#define CONFIG_FSL_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_FSL
-#define CONFIG_SYS_I2C_OFFSET 0x00000300
+#define CONFIG_SYS_FSL_I2C_OFFSET 0x00000300
#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_SLAVE 0
+#define CONFIG_SYS_FSL_I2C_SPEED 100000
+#define CONFIG_SYS_FSL_I2C_SLAVE 0
#ifdef CONFIG_CMD_DATE
#define CONFIG_RTC_DS1338
* VIDEO configuration
*/
-#define CONFIG_VIDEO
-
#ifdef CONFIG_VIDEO
#define CONFIG_VIDEO_VCXK 1