+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
*
* (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _CONFIG_EB_CPU5282_H_
#define _CONFIG_EB_CPU5282_H_
-#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP
-
/*----------------------------------------------------------------------*
* High Level Configuration Options (easy to change) *
*----------------------------------------------------------------------*/
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_MCFUART
-#define CONFIG_SYS_UART_PORT (0)
-
-#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
-
-#define CONFIG_BOOTCOMMAND "printenv"
+#define CFG_SYS_UART_PORT (0)
/*----------------------------------------------------------------------*
* Options *
*----------------------------------------------------------------------*/
-#define CONFIG_BOOT_RETRY_TIME -1
-#define CONFIG_RESET_TO_RETRY
-#define CONFIG_SPLASH_SCREEN
-
-#define CONFIG_HW_WATCHDOG
-
#define STATUS_LED_ACTIVE 0
/*----------------------------------------------------------------------*
* Environment is in the second sector of the first 256k of flash *
*----------------------------------------------------------------------*/
-#define CONFIG_ENV_ADDR 0xFF040000
-#define CONFIG_ENV_SECT_SIZE 0x00020000
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#define CONFIG_CMDLINE_EDITING
-
-#define CONFIG_MCFTMR
-
-#define CONFIG_SYS_LONGHELP 1
-
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-
-#define CONFIG_SYS_LOAD_ADDR 0x20000
-
-#define CONFIG_SYS_MEMTEST_START 0x100000
-#define CONFIG_SYS_MEMTEST_END 0x400000
-/*#define CONFIG_SYS_DRAM_TEST 1 */
-#undef CONFIG_SYS_DRAM_TEST
+/*#define CFG_SYS_DRAM_TEST 1 */
+#undef CFG_SYS_DRAM_TEST
/*----------------------------------------------------------------------*
* Clock and PLL Configuration *
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */
+#define CFG_SYS_CLK 80000000 /* 8MHz * 8 */
/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
-#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */
-#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
+#define CFG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */
+#define CFG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
/*----------------------------------------------------------------------*
* Network *
*----------------------------------------------------------------------*/
-#define CONFIG_MCFFEC
-#define CONFIG_MII 1
-#define CONFIG_MII_INIT 1
-#define CONFIG_SYS_DISCOVER_PHY
-#define CONFIG_SYS_RX_ETH_BUFFER 8
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-#define CONFIG_SYS_FEC0_PINMUX 0
-#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
-#define MCFFEC_TOUT_LOOP 50000
-
-#define CONFIG_OVERWRITE_ETHADDR_ONCE
-
/*-------------------------------------------------------------------------
* Low Level Configuration Settings
* (address mappings, register initial values, etc.)
* You should know what you are doing if you make changes here.
*-----------------------------------------------------------------------*/
-#define CONFIG_SYS_MBAR 0x40000000
+#define CFG_SYS_MBAR 0x40000000
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area (in DPRAM)
*-----------------------------------------------------------------------*/
-#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
-#define CONFIG_SYS_GBL_DATA_OFFSET \
- (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
+#define CFG_SYS_INIT_RAM_ADDR 0x20000000
+#define CFG_SYS_INIT_RAM_SIZE 0x10000
/*-----------------------------------------------------------------------
* Start addresses for the final memory configuration
* (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ * Please note that CFG_SYS_SDRAM_BASE _must_ start at 0
*/
-#define CONFIG_SYS_SDRAM_BASE0 0x00000000
-#define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */
+#define CFG_SYS_SDRAM_BASE0 0x00000000
+#define CFG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0
-#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0
-
-#define CONFIG_SYS_MONITOR_LEN 0x20000
-#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
-#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
+#define CFG_SYS_SDRAM_BASE CFG_SYS_SDRAM_BASE0
+#define CFG_SYS_SDRAM_SIZE CFG_SYS_SDRAM_SIZE0
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CFG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CONFIG_FLASH_SHOW_PROGRESS 45
-
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
-#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
-#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
-#define CONFIG_SYS_MAX_FLASH_SECT 128
-#define CONFIG_SYS_MAX_FLASH_BANKS 1
-#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000
-#define CONFIG_SYS_FLASH_PROTECTION
+#define CFG_SYS_FLASH_BASE CFG_SYS_CS0_BASE
+#define CFG_SYS_INT_FLASH_BASE 0xF0000000
+#define CFG_SYS_INT_FLASH_ENABLE 0x21
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_SYS_FLASH_SIZE 16*1024*1024
-#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CFG_SYS_FLASH_SIZE 16*1024*1024
-#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+#define CFG_SYS_FLASH_BANKS_LIST { CFG_SYS_FLASH_BASE }
/*-----------------------------------------------------------------------
* Cache Configuration
*/
-#define CONFIG_SYS_CACHELINE_SIZE 16
-
-#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 8)
-#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_INIT_RAM_SIZE - 4)
-#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM)
-#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
- CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+
+#define ICACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \
+ CFG_SYS_INIT_RAM_SIZE - 8)
+#define DCACHE_STATUS (CFG_SYS_INIT_RAM_ADDR + \
+ CFG_SYS_INIT_RAM_SIZE - 4)
+#define CFG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM)
+#define CFG_SYS_CACHE_ACR0 (CFG_SYS_SDRAM_BASE | \
+ CF_ADDRMASK(CFG_SYS_SDRAM_SIZE) | \
CF_ACR_EN | CF_ACR_SM_ALL)
-#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \
+#define CFG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \
CF_CACR_CEIB | CF_CACR_DBWE | \
CF_CACR_EUSP)
* Memory bank definitions
*/
-#define CONFIG_SYS_CS0_BASE 0xFF000000
-#define CONFIG_SYS_CS0_CTRL 0x00001980
-#define CONFIG_SYS_CS0_MASK 0x00FF0001
+#define CFG_SYS_CS0_BASE 0xFF000000
+#define CFG_SYS_CS0_CTRL 0x00001980
+#define CFG_SYS_CS0_MASK 0x00FF0001
-#define CONFIG_SYS_CS2_BASE 0xE0000000
-#define CONFIG_SYS_CS2_CTRL 0x00001980
-#define CONFIG_SYS_CS2_MASK 0x000F0001
+#define CFG_SYS_CS2_BASE 0xE0000000
+#define CFG_SYS_CS2_CTRL 0x00001980
+#define CFG_SYS_CS2_MASK 0x000F0001
-#define CONFIG_SYS_CS3_BASE 0xE0100000
-#define CONFIG_SYS_CS3_CTRL 0x00001980
-#define CONFIG_SYS_CS3_MASK 0x000F0001
+#define CFG_SYS_CS3_BASE 0xE0100000
+#define CFG_SYS_CS3_CTRL 0x00001980
+#define CFG_SYS_CS3_MASK 0x000F0001
/*-----------------------------------------------------------------------
* Port configuration
*/
-#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */
-#define CONFIG_SYS_PADDR 0x0000000
-#define CONFIG_SYS_PADAT 0x0000000
-
-#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */
-#define CONFIG_SYS_PBDDR 0x0000000
-#define CONFIG_SYS_PBDAT 0x0000000
-
-#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */
-#define CONFIG_SYS_PCDDR 0x0000000
-#define CONFIG_SYS_PCDAT 0x0000000
-
-#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */
-#define CONFIG_SYS_PCDDR 0x0000000
-#define CONFIG_SYS_PCDAT 0x0000000
-
-#define CONFIG_SYS_PASPAR 0x0F0F
-#define CONFIG_SYS_PEHLPAR 0xC0
-#define CONFIG_SYS_PUAPAR 0x0F
-#define CONFIG_SYS_DDRUA 0x05
-#define CONFIG_SYS_PJPAR 0xFF
-
-/*-----------------------------------------------------------------------
- * I2C
- */
-
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_FSL
-
-#define CONFIG_SYS_FSL_I2C_OFFSET 0x00000300
-#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
-
-#define CONFIG_SYS_FSL_I2C_SPEED 100000
-#define CONFIG_SYS_FSL_I2C_SLAVE 0
-
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_DS1338
-#define CONFIG_I2C_RTC_ADDR 0x68
-#endif
-
-/*-----------------------------------------------------------------------
- * VIDEO configuration
- */
-
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_VCXK 1
-
-#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2
-#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1
-#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE
-
-#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
-#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
-#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001
+#define CFG_SYS_PACNT 0x0000000 /* Port A D[31:24] */
+#define CFG_SYS_PADDR 0x0000000
+#define CFG_SYS_PADAT 0x0000000
-#define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT
-#define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR
-#define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002
+#define CFG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */
+#define CFG_SYS_PBDDR 0x0000000
+#define CFG_SYS_PBDAT 0x0000000
-#define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT
-#define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR
-#define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004
+#define CFG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */
-#define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE
-#define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE
-#define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2
+#define CFG_SYS_PASPAR 0x0F0F
+#define CFG_SYS_PEHLPAR 0xC0
+#define CFG_SYS_PUAPAR 0x0F
+#define CFG_SYS_DDRUA 0x05
+#define CFG_SYS_PJPAR 0xFF
-#endif /* CONFIG_VIDEO */
#endif /* _CONFIG_M5282EVB_H */
/*---------------------------------------------------------------------*/