*
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define CONFIG_SYS_USE_NAND
#define CONFIG_DRIVER_TI_EMAC_USE_RMII
#define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
-#define CONFIG_BOARD_EARLY_INIT_F
-#define CONFIG_BOARD_LATE_INIT
-#define CONFIG_VIDEO
#define CONFIG_PREBOOT
/*
* SoC Configuration
*/
#define CONFIG_MACH_DAVINCI_DA850_EVM
-#define CONFIG_ARM926EJS /* arm926ejs CPU core */
#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
+#define CONFIG_SOC_DA850 /* TI DA850 SoC */
#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
#define CONFIG_SYS_OSCIN_FREQ 24000000
#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
-#define CONFIG_SYS_HZ 1000
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_TEXT_BASE 0xc1080000
#define CONFIG_DA8XX_GPIO
/*
* Serial Driver info
*/
-#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */
#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
-#define CONFIG_BAUDRATE 115200 /* Default baud rate */
#define CONFIG_SPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_DAVINCI_SPI
#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
/*
* I2C Configuration
*/
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_DAVINCI_I2C
-#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_DAVINCI
+#define CONFIG_SYS_DAVINCI_I2C_SPEED 100000
+#define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
/*
* Network & Ethernet Configuration
*/
#ifdef CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM 0
#define CONFIG_MII
-#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
#define CONFIG_BOOTP_DNS2
#define CONFIG_BOOTP_SEND_HOSTNAME
#endif
#ifdef CONFIG_USE_SPIFLASH
-#undef CONFIG_ENV_IS_IN_FLASH
-#undef CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE (8 << 10)
#define CONFIG_ENV_OFFSET 0x80000
#define CONFIG_ENV_SECT_SIZE (64 << 10)
-#define CONFIG_SYS_NO_FLASH
#endif
-
#if defined(CONFIG_VIDEO)
#define CONFIG_VIDEO_DA8XX
-#define CONFIG_CFB_CONSOLE
-#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
-#define CONFIG_CMD_BMP
-#define CONFIG_SYS_CONSOLE_IS_IN_ENV
-#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#endif
/*
* U-Boot general configuration
*/
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
-#define CONFIG_SYS_PROMPT "ea20 > " /* Command Prompt */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
-#define CONFIG_VERSION_VARIABLE
#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_LONGHELP
-#define CONFIG_CRC32_VERIFY
#define CONFIG_MX_CYCLIC
/*
#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_BOOTDELAY 3
/*
* U-Boot commands
*/
-#include <config_cmd_default.h>
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_PING
#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_GPIO
#ifdef CONFIG_CMD_BDI
#define CONFIG_CLOCKS
#endif
#ifndef CONFIG_DRIVER_TI_EMAC
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_PING
#endif
/* NAND Setup */
#ifdef CONFIG_SYS_USE_NAND
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-#define CONFIG_CMD_NAND
-
-#define CONFIG_CMD_MTDPARTS
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
-#define CONFIG_LZO
-#define CONFIG_RBTREE
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
#define CONFIG_NAND_DAVINCI
#define CONFIG_SYS_NAND_PAGE_2K
/* SPI Flash */
#ifdef CONFIG_USE_SPIFLASH
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_FLASH
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SAVEENV
#endif
#if !defined(CONFIG_SYS_USE_NAND) && \
!defined(CONFIG_USE_NOR) && \
!defined(CONFIG_USE_SPIFLASH)
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_SIZE (16 << 10)
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_ENV
#endif
/* additions for new relocation code, must added to all boards */
* Default environment and default scripts
* to update uboot and load kernel
*/
-#define xstr(s) str(s)
-#define str(s) #s
#define CONFIG_HOSTNAME ea20
#define CONFIG_EXTRA_ENV_SETTINGS \
"rootpath=/opt/eldk/arm\0" \
"splashpos=230,180\0" \
"testrfspath=/opt/eldk/test_arm\0" \
- "tempmac=setenv ethaddr 02:ea:20:ff:ff:ff\0" \
"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \
"ubi.mtd=${as} root=ubi0:rootfs\0" \
"nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \
"loadaddr=c0000014\0" \
"memory=32M\0" \
"kernel_addr_r=c0700000\0" \
- "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
- "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
- "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/image.ext2\0" \
+ "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \
+ "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
+ "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0" \
"flash_self=run ramargs addip addtty addmtd addmisc addmem;" \
"bootm ${kernel_addr_r}\0" \
"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \
"bootm ${kernel_addr_r}\0" \
"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
- "nand_nand=ubi part nand0,${as};ubifsmount rootfs;" \
+ "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
"ubifsload ${kernel_addr_r} /boot/uImage;" \
"ubifsumount; run nandargs addip addtty " \
"addmtd addmisc addmem;clrlogo;" \
"bootm ${kernel_addr_r}\0" \
- "nand_nandrw=ubi part nand0,${as};ubifsmount rootfs;" \
+ "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
"ubifsload ${kernel_addr_r} /boot/uImage;" \
"ubifsumount; run nandrwargs addip addtty " \
"addmtd addmisc addmem;clrlogo;" \
"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \
" addip addtty addmtd addmisc addmem;" \
"clrlogo;bootm ${kernel_addr_r}\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \
"load_magic=if sf probe 0;then sf " \
"read c0000000 0x10000 0x60000;fi\0" \
- "load_nand=ubi part nand0,${as};ubifsmount rootfs;" \
+ "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \
"if ubifsload c0000014 /boot/u-boot.bin;" \
"then mw c0000008 ${filesize};else echo Error reading" \
" u-boot from nand!;fi\0" \
"fi;" \
"else echo U-Boot not downloaded..exiting;fi\0" \
"ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \
- "bootcmd=run tempmac;run net_testrfs\0"
+ "bootcmd=run net_testrfs\0"
+
+#include <asm/arch/hardware.h>
#endif /* __CONFIG_H */