Remove unused CONFIG_SERIAL_SOFTWARE_FIFO feature

[platform/kernel/u-boot.git] / include / configs / eNET.h

diff --git a/include/configs/eNET.h b/include/configs/eNET.h
index 0a86550..da2a97d 100644 (file)
--- a/include/configs/eNET.h
+++ b/include/configs/eNET.h
@@ -21,6 +21,7 @@
  * MA 02111-1307 USA
  */
 
+#include <asm/ibmpc.h>
 /*
  * board/config.h - configuration options, board specific
  */
@@ -28,6 +29,8 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+#define CONFIG_RELOC_FIXUP_WORKS
+
 /*
  * Stuff still to be dealt with -
  */
@@ -50,7 +53,26 @@
  * bottom (processor) board MUST be removed!
  */
 #undef CONFIG_WATCHDOG
-#undef CONFIG_HW_WATCHDOG
+#define CONFIG_HW_WATCHDOG
+
+ /*-----------------------------------------------------------------------
+  * Serial Configuration
+  */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_CONS_INDEX              1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    1
+#define CONFIG_SYS_NS16550_CLK         1843200
+#define CONFIG_BAUDRATE                        9600
+#define CONFIG_SYS_BAUDRATE_TABLE      \
+       {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CONFIG_SYS_NS16550_COM1                UART0_BASE
+#define CONFIG_SYS_NS16550_COM2                UART1_BASE
+#define CONFIG_SYS_NS16550_COM3                (0x1000 + UART0_BASE)
+#define CONFIG_SYS_NS16550_COM4                (0x1000 + UART1_BASE)
+#define CONFIG_SYS_NS16550_PORT_MAPPED
 
  /*-----------------------------------------------------------------------
   * Video Configuration
@@ -63,8 +85,6 @@
  */
 #define CONFIG_SYS_MALLOC_LEN  (CONFIG_ENV_SIZE + 128*1024)
 
-#define CONFIG_BAUDRATE                9600
-
 /*-----------------------------------------------------------------------
  * Command line configuration.
  */
@@ -84,9 +104,10 @@
 #define CONFIG_CMD_LOADS       /* loads                        */
 #define CONFIG_CMD_MEMORY      /* md mm nm mw cp cmp crc base loop mtest */
 #define CONFIG_CMD_MISC                /* Misc functions like sleep etc*/
-#undef CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
+#define CONFIG_CMD_NET         /* bootp, tftpboot, rarpboot    */
 #undef CONFIG_CMD_NFS          /* NFS support                  */
 #define CONFIG_CMD_PCI         /* PCI support                  */
+#define CONFIG_CMD_PING                /* ICMP echo support            */
 #define CONFIG_CMD_RUN         /* run command in env variable  */
 #define CONFIG_CMD_SAVEENV     /* saveenv                      */
 #define CONFIG_CMD_SETGETDCR   /* DCR support on 4xx           */
@@ -119,10 +140,7 @@
 
 #define        CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 
-#define        CONFIG_SYS_HZ                   1024            /* incrementer freq: 1kHz */
-
-                                               /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 19200, 38400, 57600, 115200 }
+#define        CONFIG_SYS_HZ                   1000            /* incrementer freq: 1kHz */
 
 /*-----------------------------------------------------------------------
  * SDRAM Configuration
@@ -141,7 +159,7 @@
  * CPU Features
  */
 #define CONFIG_SYS_SC520_HIGH_SPEED    0       /* 100 or 133MHz */
-#undef  CONFIG_SYS_SC520_RESET                 /* use SC520 MMCR's to reset cpu */
+#define CONFIG_SYS_SC520_RESET                 /* use SC520 MMCR's to reset cpu */
 #define CONFIG_SYS_SC520_TIMER                 /* use SC520 swtimers */
 #undef  CONFIG_SYS_GENERIC_TIMER               /* use the i8254 PIT timers */
 #undef  CONFIG_SYS_TSC_TIMER                   /* use the Pentium TSC timers */
@@ -180,7 +198,7 @@
                                         CONFIG_SYS_FLASH_BASE_1, \
                                         CONFIG_SYS_FLASH_BASE_2}
 #define CONFIG_SYS_FLASH_EMPTY_INFO
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 #define CONFIG_SYS_MAX_FLASH_SECT      128     /* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_CFI_WIDTH     FLASH_CFI_8BIT
 #define CONFIG_SYS_FLASH_LEGACY_512Kx8
@@ -208,13 +226,11 @@
 #define CONFIG_SYS_THIRD_PCI_IRQ   11
 #define CONFIG_SYS_FORTH_PCI_IRQ   15
 
-/*-----------------------------------------------------------------------
- * Hardware watchdog configuration
+ /*
+ * Network device (TRL8100B) support
  */
-#define CONFIG_SYS_WATCHDOG_PIO_BIT            0x8000
-#define CONFIG_SYS_WATCHDIG_PIO_DATA           SC520_PIODATA15_0
-#define CONFIG_SYS_WATCHDIG_PIO_CLR            SC520_PIOCLR15_0
-#define CONFIG_SYS_WATCHDIG_PIO_SET            SC520_PIOSET15_0
+#define CONFIG_NET_MULTI
+#define CONFIG_RTL8139
 
 /*-----------------------------------------------------------------------
  * FPGA configuration