+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2011
* Jason Cooper <u-boot@lakedaemon.net>
* Based on work by:
* Marvell Semiconductor <www.marvell.com>
* Written-by: Siddarth Gore <gores@marvell.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
*/
#ifndef _CONFIG_DREAMPLUG_H
#define _CONFIG_DREAMPLUG_H
/*
- * FIXME: This belongs in mach-types.h. However, we only pull mach-types
- * from Linus' kernel.org tree. This hasn't been updated primarily due to
- * the recent arch/arm reshuffling. So, in the meantime, we'll place it
- * here.
- */
-#include <asm/mach-types.h>
-#ifdef MACH_TYPE_DREAMPLUG
-#error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
-#else
-#define MACH_TYPE_DREAMPLUG 3550
-#endif
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING "\nMarvell-DreamPlug"
-
-/*
* High Level Configuration Options (easy to change)
*/
#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
-#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
-#define CONFIG_KW88F6281 1 /* SOC Name */
#define CONFIG_MACH_TYPE MACH_TYPE_DREAMPLUG
-#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
* Commands configuration
*/
-#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DATE
/*
- * mv-common.h should be defined after CMD configs since it used them
+ * mv-plug-common.h should be defined after CMD configs since it used them
* to enable certain macros
*/
-#include "mv-common.h"
+#include "mv-plug-common.h"
/*
* Environment variables configurations
*/
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_ENV_IS_IN_SPI_FLASH 1
-#define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
-#else
-#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
-#endif
-
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH 1
-#define CONFIG_HARD_SPI 1
-#define CONFIG_KIRKWOOD_SPI 1
-#define CONFIG_SPI_FLASH_MACRONIX 1
-#define CONFIG_ENV_SPI_BUS 0
-#define CONFIG_ENV_SPI_CS 0
-#define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
-#endif
/*
* max 4k env size is enough, but in case of nand
* it has to be rounded to sector size
*/
-#define CONFIG_ENV_SIZE 0x1000 /* 4k */
-#define CONFIG_ENV_ADDR 0x100000
-#define CONFIG_ENV_OFFSET 0x100000 /* env starts here */
/*
* Default environment variables
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
#endif /*CONFIG_MVSATA_IDE*/
-/*
- * RTC driver configuration
- */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_MV
-#endif /* CONFIG_CMD_DATE */
-
-#define CONFIG_SYS_ALT_MEMTEST
-
-/*
- * display enhanced info about the cpu at boot.
- */
-#define CONFIG_DISPLAY_CPUINFO
-
#endif /* _CONFIG_DREAMPLUG_H */