+/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Board configuration file for Dragonboard 410C
*
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIGS_DRAGONBOARD410C_H
#include <linux/sizes.h>
#include <asm/arch/sysmap-apq8016.h>
-#define CONFIG_IDENT_STRING "\nQualcomm-DragonBoard 410C"
-
-#define CONFIG_MISC_INIT_R /* To stop autoboot */
-
/* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM_1 0x80000000
/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
#define PHYS_SDRAM_1_SIZE 0x3da00000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_TEXT_BASE 0x80080000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
-#define CONFIG_SYS_BOOTM_LEN 0x1000000 /* 16MB max kernel size */
-
-#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_SYS_BOOTM_LEN SZ_64M
/* UART */
-#define CONFIG_BAUDRATE 115200
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 19000000
-/* This are needed to have proper mmc support */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_SDHCI
-
#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
/* Fixup - in init code we switch from device to host mode,
* it has to be done after each HCD reset */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_USB_HOST_ETHER /* Enable USB Networking */
-
-/* Support all possible USB ethernet dongles */
-#define CONFIG_USB_ETHER_DM9601
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_ASIX88179
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_SMSC95XX
-
-/* Libraries */
-#define CONFIG_MD5
-
-/* Extra Commands */
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_GPT
-#define CONFIG_CMD_MD5SUM
-/* Enable that for switching of boot partitions */
-/* Disabled by default as some sub-commands can brick eMMC */
-/*#define CONFIG_SUPPORT_EMMC_BOOT */
-#define CONFIG_CMD_PART
-#define CONFIG_CMD_REGINFO /* Register dump */
-#define CONFIG_CMD_TFTP
-#define CONFIG_CMD_UNZIP
-
-/* Partition table support */
-#define HAVE_BLOCK_DEVICE /* Needed for partition commands */
-#define CONFIG_PARTITION_UUIDS
-
-#include <config_distro_defaults.h>
-
/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
-/* Environment - Boot*/
-#define CONFIG_BOOTARGS "console=ttyMSM0,115200n8"
-
#define BOOT_TARGET_DEVICES(func) \
func(USB, usb, 0) \
- func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
+ func(MMC, mmc, 0) \
func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
"initrd_high=0xffffffffffffffff\0" \
"linux_image=Image\0" \
"kernel_addr_r=0x81000000\0"\
- "fdtfile=apq8016-sbc.dtb\0" \
+ "fdtfile=qcom/apq8016-sbc.dtb\0" \
"fdt_addr_r=0x83000000\0"\
"ramdisk_addr_r=0x84000000\0"\
+ "scriptaddr=0x90000000\0"\
+ "pxefile_addr_r=0x90100000\0"\
BOOTENV
-#define CONFIG_ENV_IS_NOWHERE
#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* mmc0 = emmc, mmc1 = sd */
+#define CONFIG_SYS_MMC_ENV_PART 2 /* Set env partition to BOOT2 partition */
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_8M)
/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
- sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
#define CONFIG_SYS_MAXARGS 64 /* max command args */
#endif