#define __CONFIG_DRA7XX_EVM_H
#define CONFIG_DRA7XX
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_IODELAY_RECALIBRATION
+#endif
+
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_PHYS_64BIT
+#define CONFIG_NR_DRAM_BANKS 2
+#define CONFIG_MAX_MEM_MAPPED 0x80000000
#ifndef CONFIG_QSPI_BOOT
/* MMC ENV related defines */
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#endif
-#define CONFIG_CMD_SAVEENV
#if (CONFIG_CONS_INDEX == 1)
#define CONSOLEDEV "ttyO0"
#define CONFIG_SYS_OMAP_ABE_SYSCK
+#ifndef CONFIG_SPL_BUILD
/* Define the default GPT table for eMMC */
#define PARTS_DEFAULT \
+ /* Linux partitions */ \
+ "uuid_disk=${uuid_gpt_disk};" \
+ "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \
+ /* Android partitions */ \
+ "partitions_android=" \
"uuid_disk=${uuid_gpt_disk};" \
- "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
+ "name=xloader,start=128K,size=128K,uuid=${uuid_gpt_xloader};" \
+ "name=bootloader,size=384K,uuid=${uuid_gpt_bootloader};" \
+ "name=environment,size=128K,uuid=${uuid_gpt_environment};" \
+ "name=misc,size=128K,uuid=${uuid_gpt_misc};" \
+ "name=efs,start=1280K,size=16M,uuid=${uuid_gpt_efs};" \
+ "name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
+ "name=recovery,size=10M,uuid=${uuid_gpt_recovery};" \
+ "name=boot,size=10M,uuid=${uuid_gpt_boot};" \
+ "name=system,size=768M,uuid=${uuid_gpt_system};" \
+ "name=cache,size=256M,uuid=${uuid_gpt_cache};" \
+ "name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
+ "name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
+ "name=userdata,size=-,uuid=${uuid_gpt_userdata}"
+
+#define DFU_ALT_INFO_MMC \
+ "dfu_alt_info_mmc=" \
+ "boot part 0 1;" \
+ "rootfs part 0 2;" \
+ "MLO fat 0 1;" \
+ "MLO.raw raw 0x100 0x100;" \
+ "u-boot.img.raw raw 0x300 0x400;" \
+ "spl-os-args.raw raw 0x80 0x80;" \
+ "spl-os-image.raw raw 0x900 0x2000;" \
+ "spl-os-args fat 0 1;" \
+ "spl-os-image fat 0 1;" \
+ "u-boot.img fat 0 1;" \
+ "uEnv.txt fat 0 1\0"
+
+#define DFU_ALT_INFO_EMMC \
+ "dfu_alt_info_emmc=" \
+ "rawemmc raw 0 3751936;" \
+ "boot part 1 1;" \
+ "rootfs part 1 2;" \
+ "MLO fat 1 1;" \
+ "MLO.raw raw 0x100 0x100;" \
+ "u-boot.img.raw raw 0x300 0x400;" \
+ "spl-os-args.raw raw 0x80 0x80;" \
+ "spl-os-image.raw raw 0x900 0x2000;" \
+ "spl-os-args fat 1 1;" \
+ "spl-os-image fat 1 1;" \
+ "u-boot.img fat 1 1;" \
+ "uEnv.txt fat 1 1\0"
+
+#define DFU_ALT_INFO_RAM \
+ "dfu_alt_info_ram=" \
+ "kernel ram 0x80200000 0x4000000;" \
+ "fdt ram 0x80f80000 0x80000;" \
+ "ramdisk ram 0x81000000 0x4000000\0"
+
+#define DFU_ALT_INFO_QSPI \
+ "dfu_alt_info_qspi=" \
+ "MLO raw 0x0 0x010000;" \
+ "MLO.backup1 raw 0x010000 0x010000;" \
+ "MLO.backup2 raw 0x020000 0x010000;" \
+ "MLO.backup3 raw 0x030000 0x010000;" \
+ "u-boot.img raw 0x040000 0x0100000;" \
+ "u-boot-spl-os raw 0x140000 0x080000;" \
+ "u-boot-env raw 0x1C0000 0x010000;" \
+ "u-boot-env.backup raw 0x1D0000 0x010000;" \
+ "kernel raw 0x1E0000 0x800000\0"
+
+#define DFUARGS \
+ "dfu_bufsiz=0x10000\0" \
+ DFU_ALT_INFO_MMC \
+ DFU_ALT_INFO_EMMC \
+ DFU_ALT_INFO_RAM \
+ DFU_ALT_INFO_QSPI
+
+/* Fastboot */
+#define CONFIG_USB_FUNCTION_FASTBOOT
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
+#define CONFIG_FASTBOOT_BUF_SIZE 0x2F000000
+#define CONFIG_FASTBOOT_FLASH
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
+#endif
#include <configs/ti_omap5_common.h>
/* Enhance our eMMC support / experience. */
#define CONFIG_CMD_GPT
#define CONFIG_EFI_PARTITION
-#define CONFIG_PARTITION_UUIDS
-#define CONFIG_CMD_PART
+#define CONFIG_RANDOM_UUID
+#define CONFIG_HSMMC2_8BIT
/* CPSW Ethernet */
-#define CONFIG_CMD_NET /* 'bootp' and 'tftp' */
#define CONFIG_CMD_DHCP
#define CONFIG_BOOTP_DNS /* Configurable parts of CMD_DHCP */
#define CONFIG_BOOTP_DNS2
#define CONFIG_MII /* Required in net/eth.c */
#define CONFIG_PHY_GIGE /* per-board part of CPSW */
#define CONFIG_PHYLIB
+#define CONFIG_PHY_TI
/* SPI */
#undef CONFIG_OMAP3_SPI
-#define CONFIG_TI_QSPI
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_SPANSION
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
-#define CONFIG_SPI_FLASH_BAR
#define CONFIG_TI_SPI_MMAP
-#define CONFIG_SF_DEFAULT_SPEED 48000000
-#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3
+#define CONFIG_SF_DEFAULT_SPEED 64000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_QSPI_QUAD_SUPPORT
+
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
+#endif
/*
* Default to using SPI for environment, etc.
/* SPI SPL */
#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_DMA_SUPPORT
+#define CONFIG_TI_EDMA3
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SPL_SPI_FLASH_SUPPORT
-#define CONFIG_SPL_SPI_BUS 0
-#define CONFIG_SPL_SPI_CS 0
#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_CMD_USB
#define CONFIG_USB_HOST
#define CONFIG_USB_XHCI
+#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_XHCI_OMAP
#define CONFIG_USB_STORAGE
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
#define CONFIG_OMAP_USB_PHY
#define CONFIG_OMAP_USB2PHY2_HOST
+/* USB GADGET */
+#define CONFIG_USB_DWC3_PHY_OMAP
+#define CONFIG_USB_DWC3_OMAP
+#define CONFIG_USB_DWC3
+#define CONFIG_USB_DWC3_GADGET
+
+#define CONFIG_USB_GADGET_DOWNLOAD
+#define CONFIG_USB_GADGET_VBUS_DRAW 2
+#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
+#define CONFIG_G_DNL_VENDOR_NUM 0x0451
+#define CONFIG_G_DNL_PRODUCT_NUM 0xd022
+#define CONFIG_USB_GADGET_DUALSPEED
+
+/* USB Device Firmware Update support */
+#define CONFIG_USB_FUNCTION_DFU
+#define CONFIG_DFU_RAM
+#define CONFIG_CMD_DFU
+
+#define CONFIG_DFU_MMC
+#define CONFIG_DFU_RAM
+#define CONFIG_DFU_SF
+
/* SATA */
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_CMD_SCSI
"128k(NAND.u-boot-env)," \
"128k(NAND.u-boot-env.backup1)," \
"8m(NAND.kernel)," \
- "-(NAND.rootfs)"
+ "-(NAND.file-system)"
#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000
/* NAND: SPL related configs */
#ifdef CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SYS_FLASH_SIZE (64 * 1024 * 1024) /* 64 MB */
/* #define CONFIG_INIT_IGNORE_ERROR */
#undef CONFIG_SYS_NO_FLASH
-#define CONFIG_CMD_FLASH
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_PROTECTION
#define CONFIG_SYS_FLASH_CFI
#endif
#endif /* NOR support */
+/* EEPROM */
+#define CONFIG_EEPROM_CHIP_ADDRESS 0x50
+#define CONFIG_EEPROM_BUS_ADDRESS 0
+
#endif /* __CONFIG_DRA7XX_EVM_H */
projects / platform / kernel / u-boot.git / blobdiff